Article: Q71872
Product(s): Microsoft Disk Operating System
Version(s): 5.0
Operating System(s):
Keyword(s): msdos
Last Modified: 31-JAN-2002
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft MS-DOS operating system version 5.0
-------------------------------------------------------------------------------
SUMMARY
=======
The following information was taken from the Microsoft MS-DOS 5 Upgrade
README.TXT file.
MORE INFORMATION
================
6. MAKING YOUR NETWORK COMPATIBLE WITH MS-DOS 5.0
-------------------------------------------------
6.1 MS-DOS Shell and Networks:
Most network software won't work correctly if you start it from a MS-DOS Shell
command prompt. Start your network before starting MS-DOS Shell.
6.2 3+Share:
If you installed 3Com 3+Share with minimal NetBIOS implementation, do one of the
following:
- Reinstall with a complete NetBIOS implementation.
- Use the REDIR.400 file to replace the MSREDIR.EXE file on your hard disk.
- Call Microsoft Sales Information Center (MSIC) and request the LAN Manager
2.0 supplemental disk; see your registration card for the phone number.
6.3 AT&T StarGROUP:
If your AT&T StarGROUP version does not support MS-DOS 5.0, contact your
AT&T representative or the AT&T National Systems Support Hotline for
information about required modifications or upgrades.
6.4 Microsoft LAN Manager 2.0 Enhanced:
If you are running Microsoft LAN Manager 2.0 Enhanced or an OEM version of LAN
Manager 2.0 Enhanced, you may want to take advantage of any remaining space in
the upper memory area to load LAN Manager services such as NETPOPUP in this
area. Call Microsoft Customer Service to request the LAN Manager 2.0
supplemental disk and technical notes. See your registration card for the phone
number.
************************************************************
* *
* the Lan Manager 2.0 supplemental disk can be obtained *
* by calling: 800-426-9400 *
* *
************************************************************
If you are running Microsoft LAN Manager 2.0 Enhanced and get a "NET3055"
message, do one of the following:
- Use the EMM386 /ram switch and the LIM=YES command in the [workstation]
section of your LANMAN.INI file.
- or -
- If you use the EMM386 /noems switch, use the LIM=NO command in the
[workstation] section of your LANMAN.INI file.
6.5 Net/One PC:
If Ungermann-Bass Net/One PC does not load with MS-DOS 5.0, do one of the
following:
- Contact your vendor to get an updated LOADNIU.EXE file.
- Put a UBPAUSE command between the LOADNIU and XNSBIOS lines of the MSNET.INI
file.
- Issue network commands from a batch file that includes a PAUSE command
between the LOADNIU and XNSBIOS lines.
6.6 Novell Networks:
NetWare Shell Version:
The NetWare workstation shell software is Novell's basic DOS shell and is
included with MS-DOS 5.0. You may require a different shell for a specific
application. Contact your authorized Novell reseller if you believe another
shell may be needed. EMSNET5.EXE and XMSNET5.EXE, alternate shells, are
available from Novell.
Novell Remote Workstations (RPLFIX.COM):
If you can't load MS-DOS 5.0 on your remote-boot workstation, contact Novell
for an upgrade of your remote-boot software.
Drive Mapping Utilities:
If you run LOGIN.EXE, MAP.EXE, and SESSION.EXE from MS-DOS Shell or while
MS-DOS Shell is running, a search path is not added to the existing path. Use
these programs before starting MS-DOS Shell.
COMSPEC Variable:
If you use the Novell login program to set the COMSPEC variable after
starting MS-DOS 5.0, and you can't reload the COMMAND.COM file, remove the
c:\dos\ entry from the SHELL= command in your CONFIG.SYS file or contact your
Novell vendor to get a new login program.
TBMI2.COM and Task Swapper:
If you can't use Task Swapper in MS-DOS Shell when running a Novell network,
do the following:
1. Expand and copy the IPX.OB_ and TBMI2.CO_ files from Disk 6 for 5.25" disks
or from Disk 3 for 3.5" disks.
2. Rename the files IPX.OBJ and TBMI2.COM.
3. Use the IPX.OBJ file to create a new IPX.COM file. For information about
creating an IPX.COM file, see your Novell documentation.
4. Start your network, using the new IPX.COM and NET5.COM files.
5. Start TBMI2.COM.
6. Start the application that may be causing problems with Task Swapper. Run the
application and then exit.
7. Display diagnostic information by typing the following:
" tbmi2 /d" (without the quotation marks)
8. If the value in the field named Far Call Usage is not 0, you need to run
TBMI2.COM before using Task Swapper.
To get help with TBMI2.COM, type the following:
" tbmi2 /?" (without the quotation marks)
The default configuration for TBMI2.COM is correct for most applications. If
you need help configuring the program, contact Novell.
TBMI2.COM and Windows:
Don't run TBMI2.COM if you are using Windows 3.0.
6.7 PC-NFS 3.0:
If you use PC-NFS 3.0 with MS-DOS Shell, MS-DOS Shell may display more drives
than you have currently enabled. To prevent this, use the PC-NFS /d switch to
specify the number of drives you are using. For more information, see your
PC-NFS documentation.
If you can't use the COPY or XCOPY command on PC-NFS 3.01, contact your vendor to
get an updated version of the PCNFS.SYS device driver.
6.8 TOPS Network:
If your system is a TOPS workstation, the MS-DOS Shell MOVE command may not
work.
Don't use the LOADHIGH command with a TOPS network.
Additional query words: 5.00 noupd
======================================================================
Keywords : msdos
Technology : kbMSDOSSearch kbMSDOS500
Version : :5.0
=============================================================================