Article: Q72168
Product(s): Microsoft Disk Operating System
Version(s): 5.0
Operating System(s):
Keyword(s):
Last Modified: 01-FEB-2002
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft MS-DOS operating system version 5.0
-------------------------------------------------------------------------------
SUMMARY
=======
The following information is taken from the Microsoft MS-DOS 5 README.TXT file.
This is the packaged product of MS-DOS version 5.0 that is licensed to OEMs
(original equipment manufacturers).
MORE INFORMATION
================
7. MAKING YOUR NETWORK COMPATIBLE WITH MS-DOS 5.0
-------------------------------------------------
7.1 MS-DOS Shell and Networks:
Most network software won't work correctly if you start it from a MS-DOS Shell
command prompt. Start your network before starting MS-DOS Shell.
7.2 AT&T StarGROUP:
If your AT&T StarGROUP version does not support MS-DOS 5.0, contact your
AT&T representative or the AT&T National Systems Support Hotline for
information about required modifications or upgrades.
7.3 PC-NFS 3.0:
If you use PC-NFS 3.0 with MS-DOS Shell, MS-DOS Shell may display more drives
than you have currently enabled. To prevent this, use the PC-NFS /d switch to
specify the number of drives you are using. For more information, see your
PC-NFS documentation.
If you can't use the COPY or XCOPY command on PC-NFS 3.01, contact your vendor to
get an updated version of the PCNFS.SYS device driver.
7.4 TOPS Network:
If your system is a TOPS workstation, the MS-DOS Shell MOVE command may not
work.
Don't use the LOADHIGH command with a TOPS network.
Additional query words: 5.00
======================================================================
Keywords :
Technology : kbMSDOSSearch kbMSDOS500
Version : :5.0
=============================================================================