Article: Q72169
Product(s): Microsoft Disk Operating System
Version(s): 5.0
Operating System(s):
Keyword(s):
Last Modified: 04-FEB-2002
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft MS-DOS operating system version 5.0
-------------------------------------------------------------------------------
SUMMARY
=======
The following information was taken from the Microsoft MS-DOS 5 README.TXT file.
This is the packaged product of MS-DOS version 5.0 that is licensed to OEMs
(original equipment manufacturers).
MORE INFORMATION
================
8. DOCUMENTATION CORRECTIONS AND ADDITIONS
------------------------------------------
8.1 New CV.COM for CodeView:
Users of CodeView versions 3.0 to 3.13 should use the program CV.COM to start
CodeView. For more details, see the section on CodeView in the file
APPNOTES.TXT.
8.2 Documentation Corrections:
The following are corrections to the "Microsoft MS-DOS User's Guide and
Reference":
COMP /? Help:
Online help for the COMP command /d switch should state that the default
format is hexadecimal.
EXPAND Command:
The example in Chapter 4 of the "Microsoft MS-DOS Getting Started" guide
refers to the wrong installation and upgrade disks. The disk referred to as
Disk 1 should be Disk 2; the disk referred to as Disk 2 should be Disk 3.
FORMAT Command:
If you can't use the FORMAT command to format an unformatted disk, try using
the /u switch.
MIRROR Command:
You cannot use the MIRROR command with a network drive or any drive you
created by using the ASSIGN, SUBST, or JOIN command.
UNDELETE Command:
Do not use the UNDELETE command in the following circumstances:
- When other programs are active.
- With the LOAD= command or the SHIFT+ENTER key combination in Windows.
- With Task Swapper in MS-DOS Shell.
UNFORMAT Command:
The UNFORMAT /p switch is not compatible with the /j switch.
8.3 Hercules Display Adapter (MSHERC.COM):
If you use MS-DOS Editor or QBasic with a Hercules display adapter, run
MSHERC.COM before you run either program.
8.4 QBasic "On Error" Command:
Online help for Microsoft QBasic incorrectly states that ON ERROR RESUME NEXT is
a valid statement. The correct syntax is as follows:
ON ERROR GOTO <LINE/LABEL>
8.5 SMARTDrive and Third-Party Partitions:
If your system includes a third-party disk partition and you try to use
SMARTDrive, you may receive a message stating that you cannot load SMARTDrive.
You can force SMARTDrive to load by specifying the /p switch. However, doing so
may corrupt your hard disk if either of the following conditions is true:
- Your hard disk contains more than 1024 cylinders.
- Your hard disk is not supported by the system's ROM BIOS.
If you have partitions created by using third-party disk-partitioning software,
use SMARTDrive ONLY if you are sure your hard disk contains 1024 or fewer
cylinders AND it is supported directly by the system's ROM BIOS.
Additional query words: 5.00
======================================================================
Keywords :
Technology : kbMSDOSSearch kbMSDOS500
Version : :5.0
=============================================================================