Article: Q80268
Product(s): Microsoft Mail For PC Networks
Version(s): WINDOWS:2.1e
Operating System(s):
Keyword(s):
Last Modified: 04-NOV-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Mail for PC Networks, version 2.1e
-------------------------------------------------------------------------------
SUMMARY
=======
The following is the contents of the Microsoft Mail version 2.1e modem script
file USRHST.MDM, which can be compiled with SCRCOMP.EXE:
;*********************************************************************
;
; Microsoft Mail Script File
;
; Filename: usrhst.mdm
; Date : Oct 26, 1990
; Script : Script file for USRobotics Courier HST modems
;
; This modem has a bank of DIP-Switches on the back. These should
; be set as follows (note that switches 1 and 6 differ from factory
; settings):
;
; QUAD 1 2 3 4 5 6 7 8 9 10
; ON XXXX X X X X
; OFF X X X X X X
;
;
; This script file contains the standard modem setup strings used
; by the External, Transmit and Listen programs. There are five
; procedures defined in this script file for setting up the modem and
; for connecting to a remote External machine.
;
; The modem setup strings used here will be adequate for most
; people but there may be some changes required if you are dialing
; overseas and require a longer wait for Carrier Detect (S7 register)
; or if you wish to change the speaker volume. Note that if you used
; the -Innn option in version 1.0 or 2.0 that you will have to modify
; the S7 register and recompile this script file.
;
; Consult your modem manual for more information on setup options.
;
; Script procedures defined:
; INITIALIZE
; RESET
; CALL
; ANSWER
; DISCONNECT
;
; Return codes for External, Transmit, Listen:
; 0 - OK
; 1 - CONNECT 300
; 2 - not defined
; 3 - NO CARRIER
; 4 - ERROR
; 5 - CONNECT 1200
; 6 - not defined
; 7 - BUSY
; 8 - NO ANSWER
; 9 - not defined
; 10 - CONNECT 2400
; 11 - not defined
; 12 - CONNECT 9600 (high speed connection)
;
;
;*********************************************************************
INITIALIZE:
title "USRobotics HST/V.32 Script"
baud 19200 ; set the baud rate
display " Baud Rate : 19200"
$attempts = 5
init_retry:
sendln "ATZ" ; reset modem to default settings
wait 2
waitrsp 1
if ("0" isin response)
goto reset_okay
if ("OK" isin response)
{
reset_okay:
sendln "AT&F&B1&H1&R2&S1E0M1V0X3"
wait 2
waitrsp 3
if ("0^M" isin response)
{
sendln "ATS0=0S10=50&W"
waitrsp 3
if (response = "0^M")
return 0
}
}
dec $attempts
if ($attempts > 0)
goto init_retry
return 4
RESET:
baud 19200 ; set the baud rate
display " Baud Rate : 19200"
sendln "ATZ" ; reset modem to default settings
waitrsp 2
if (response = "0^M")
return 0
else
return 4
CALL:
$ret = 8 ; set default ret code to "no answer"
clearrsp ; clear the response buffer
echo 0 ; do not display phone number
sendln "ATD" + dial_mode + phone_number ; execute the dial up
echo 1 ; turn echo back on
waitrsp 120 ; wait until the modem responds (max
; 2 minutes)
if (response = "1^M")
{
display ">>> CONNECT 300 <<<"
$ret = 1
}
else if (response = "3^M")
{
display ">>> NO CARRIER <<<"
$ret = 8 ; no answer or no connect
}
else if (response = "5^M")
{
display ">>> CONNECT 1200 <<<"
$ret = 5
}
else if (response = "7^M")
{
display ">>> BUSY <<<"
$ret = 7 ; busy
}
else if (response = "10^M")
{
display ">>> CONNECT 2400 <<<"
$ret = 10
}
else if (response = "13^M")
{
display ">>> CONNECT 9600 <<<"
$ret = 12
}
else if (response = "18^M")
{
display ">>> CONNECT 4800 <<<"
$ret = 11
}
else if (response = "14^M")
{
display ">>> CONNECT 300/ARQ <<<"
$ret = 1
}
else if (response = "15^M")
{
display ">>> CONNECT 1200/ARQ <<<"
$ret = 5
}
else if (response = "16^M")
{
display ">>> CONNECT 2400/ARQ <<<"
$ret = 10
}
else if (response = "17^M")
{
display ">>> CONNECT 9600/ARQ <<<"
$ret = 12
}
else if (response = "19^M")
{
display ">>> CONNECT 4800/ARQ <<<"
$ret = 11
}
return $ret ; return connect baud rate to
; application
ANSWER:
$ret = 8 ; set default ret code to "no answer"
waitrsp 1 ; see if phone is ringing
if (response = "2^M") ; 2 is numeric form of "RING"
{
if (listen = 1) ; see if Listen program is running or
sendln "ATD" ; not answer phone in originate mode
; (Listen)
else
sendln "ATA" ; answer the phone normally
waitrsp 120 ; wait for return code from modem (max
; 2 minutes)
if (response = "1^M")
{
display ">>> CONNECT 300 <<<"
$ret = 1
}
else if (response = "3^M")
{
display ">>> NO CARRIER <<<"
$ret = 8 ; no answer or no connect
}
else if (response = "5^M")
{
display ">>> CONNECT 1200 <<<"
$ret = 5
}
else if (response = "10^M")
{
display ">>> CONNECT 2400 <<<"
$ret = 10
}
else if (response = "13^M")
{
display ">>> CONNECT 9600 <<<"
$ret = 12
}
else if (response = "18^M")
{
display ">>> CONNECT 4800 <<<"
$ret = 11
}
else if (response = "14^M")
{
display ">>> CONNECT 300/ARQ <<<"
$ret = 1
}
else if (response = "15^M")
{
display ">>> CONNECT 1200/ARQ <<<"
$ret = 5
}
else if (response = "16^M")
{
display ">>> CONNECT 2400/ARQ <<<"
$ret = 10
}
else if (response = "17^M")
{
display ">>> CONNECT 9600/ARQ <<<"
$ret = 12
}
else if (response = "19^M")
{
display ">>> CONNECT 4800/ARQ <<<"
$ret = 11
}
}
return $ret ; return connect baud rate to
; application
DISCONNECT:
wait 2 ; wait 2 seconds
send "+++" ; send escape sequence to put modem
; back to command state
wait 2 ; wait 2 seconds
clearrsp ; clear the response buffer
sendln "ATH0" ; hang up the phone
waitrsp 3 ; wait for a response
if (response != "0^M") ; if hang up failed, drop DTR to force
; hang up
{
DTR 0 ; drop DTR to reset modem
wait 2 ; some modems require a delay here
DTR 1 ; raise DTR
clearrsp ; clear response buffer
}
return 0 ; always return OK
Additional query words: 2.10 2.1 2.10e
======================================================================
Keywords :
Technology : kbMailSearch kbZNotKeyword3 kbMailPCN210e
Version : WINDOWS:2.1e
=============================================================================