Article: Q80996
Product(s): Microsoft LAN Manager
Version(s):
Operating System(s):
Keyword(s):
Last Modified: 30-JUL-2001
SUMMARY
=======
The Adaptec 1540B/1542B BID that shipped with OS/2 version 1.3 for servers does
not support I/O addresses of 134/130. Instead, supported addresses are 334/330
and 234/230. If an address of 134/130 is used, the installation disk will be
unable to recognize the existence of the controller, and therefore, will not
install OS/2 on the machine.
MORE INFORMATION
================
Because these I/O addresses are not supported, the jumper block labeled J7 on
the controller must not have pin 4 jumpered (I/O address of 134) or pins 2 and 4
jumpered (I/O address 130).
The following is the jumper block and a table of possible address selections:
1 oo
2 oo ]
3 oo ] I/O Address selection jumpers
4 oo ]
5 oo
6 oo
7 oo
8 oo
J7
Address Pins to Jumper
------- --------------
334 none
330 2
234 3
230 2,3
134* 4
130* 2,4
* - Unsupported under current AHA-154x BID
The above information is subject to change without notification. For the latest
information on the AHA-154x BID, contact Adaptec.
Additional query words: 2.10 2.10a 2.20
======================================================================
Keywords :
=============================================================================