Article: Q93019
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:3.1,3.11
Operating System(s):
Keyword(s):
Last Modified: 13-OCT-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows for Workgroups versions 3.1, 3.11
-------------------------------------------------------------------------------
SUMMARY
=======
The following configuration is not supported by 802.3 10BASE2 (Thin Ethernet)
cable:
tT ----RG58/u (Main Cable)-------------Tt
| |
|<---RG58/u (Drop Cable) |
| |
NIC NIC
Key
t = terminator
T = T-connector
NIC = network interface card
The additional drop cable depicted in the above diagram should not be used. The
T-connector should be connected directly to the network interface card.
MORE INFORMATION
================
Because Thin Ethernet network interface cards are not impedance matched, some of
the signal coming off the main cable reflects off the network interface card and
back on to the main cable.
If the distance is short (less than one to two inches), the echo lands right on
top of the main signal and no distortion occurs.
If the distance is long (more than one to two inches), the time taken for the
signal to travel down the drop cable, bounce off the card, and come back, is
significant and can make the echo land on top of the next pulse, which can
result in scrambled signals.
Additional query words: 3.10
======================================================================
Keywords :
Technology : kbAudDeveloper kbWFWSearch kbWFW310 kbWFW311
Version : WINDOWS:3.1,3.11
=============================================================================