Article: Q94165
Product(s): Microsoft Windows 95.x Retail Product
Version(s): WINDOWS:3.1,3.11
Operating System(s):
Keyword(s):
Last Modified: 06-DEC-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows versions 3.1, 3.11
-------------------------------------------------------------------------------
SYMPTOMS
========
After you print in either mode of Windows using the Okidata 24-pin driver
(OKI24.DRV), you may have problems printing from an MS-DOS command prompt or
from MS-DOS-based application in Windows.
These problems include:
- All MS-DOS printing is triple-spaced on an Okidata ML 393 after printing in
Windows
- All MS-DOS printing has extremely small line feeds, and an entire page prints
in only a few lines on an Okidata ML 393 Plus after printing in Windows.
CAUSE
=====
The problems occur with the OKI24.DRV version 1.0 dated 3/10/92 that ships with
Windows 3.1. The Windows driver does not appear to be properly resetting the
printer after use.
RESOLUTION
==========
Microsoft is researching this problem and will post new information here as it
becomes available.
Additional query words: 3.10 3.11 WIN31 Microline
======================================================================
Keywords :
Technology : kbWin3xSearch kbZNotKeyword3 kbWin310 kbWin311
Version : WINDOWS:3.1,3.11
=============================================================================