Article: Q96614
Product(s): Microsoft LAN Manager
Version(s):
Operating System(s):
Keyword(s):
Last Modified: 30-JUL-2001
SUMMARY
=======
This article describes switching from 802.3 to an ETHERNET2-type network stops
operation of MSIPX stack.
SYMPTOMS
========
MSIPX stack does not work.
CAUSE
=====
By default, NetWare is set to use 802.3. If you change to ETHERNET2, you need to
change settings elsewhere in the network.
RESOLUTION
==========
Make one of the following changes:
Change Network Adapter Protocol in Control Panel
------------------------------------------------
1. From Control Panel, select the Network icon.
2. Select Adapter, select Setup, then choose the Protocol button.
3. Select IPX protocol to make the Settings button active.
4. Choose Settings, then select the option that changes 802.3 to Std ETHERNET.
For Windows for Workgroups
--------------------------
There is a switch in the NetWare dialog box,
(CONTROL_PANEL\NETWORK\ADAPTERS\SETUP\PROTOCOLS\NOVELL_IPX\SETTINGS\AD
PTER_MEDIA_TYPE)
that lets you choose Novell/ETHERNET or ETHERNET_II (DIX). The Novell/ETHERNET
setting is equivalent to 802.3. Change it to ETHERNET_II (DIX).
For LAN Manager
---------------
Use the Novell ECONFIG utility to switch to ETHERNET II (DIX).
On the client:
- If the driver is ODI, under the Link Driver section of NET.CFG you must
define the allowable frame formats (ETHERNET_II and ETHERNET_802.3) as well
as which IPX is to be used. (For example: Protocol IPX 8137 ETHERNET_II.)
- If the driver is not ODI, use the ECONFIG utility (for example: ECONFIG
IPX.COM SHELL:E).
Novell's ODI drivers are designed to default to 802.2 for the drivers below:
When using these drivers, you must use either the 802.2 frame type on your server
or change the frame type for the workstation in your NET.CFG (or SHELL.CFG)
file.
EXOS COM 20850 05-12-92 11:24a
NE1000 COM 19455 09-08-92 3:10p
NE1500T COM 28758 05-14-92 1:42p
NE2 COM 19839 10-27-92 2:38p
NE2_32 COM 19551 10-27-92 2:39p
NE2000 COM 19715 09-08-92 3:10p
NE2100 COM 28756 05-14-92 1:42p
NE3200 COM 26248 10-08-92 9:56a
If you want to continue to use the 802.3 frame type, place the following two
lines in the NET.CFG (or SHELL.CFG) file:
" Link Driver <drivername>
Frame Ethernet_802.3" (without the quotation marks)
If you want to use the NE2000.COM driver, replace <drivername> with NE2000.
Be sure to indent the second line and to place a carriage return after the
second line.
On a 3.11 Server
----------------
1. In the AUTOEXEC.NCF, load the frame type for the board, and give it a name
such as LOAD 3C503 FRAME=ETHERNET_II NAME=ETHER.
2. Bind IPX to ETHER net=<net number> on a 2.x server.
3. Run ECONFIG.
Additional query words: wfw wfwg 2.00 2.10 2.20
======================================================================
Keywords :
=============================================================================