Article: Q107208
Product(s): Microsoft Windows NT
Version(s): 3.1
Operating System(s):
Keyword(s): kbhw kbHardware
Last Modified: 08-AUG-2001
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows NT Server version 3.1
- Microsoft Windows NT Workstation version 3.1
- Microsoft Windows NT Advanced Server, version 3.1
-------------------------------------------------------------------------------
SYMPTOMS
========
When you attempt to set up Windows NT 3.1 on a SCSI hard disk drive chained off
of an Adaptec 1740/1742 SCSI host adapter, you may receive the following error
message:
Disk I/O Error Status=00008000
This error message occurs after the following message is displayed:
NTDETECT Version 1.0 Checking Hardware...
NOTE: This problem may also occur when you use an Adaptec 2740 SCSI host adapter.
STATUS
======
According to Adaptec, you must upgrade the BIOS to version 1.4. To order this
BIOS revision, call Adaptec Product Fulfillment at (800) 442-7274.
The Adaptec products discussed here are manufactured by Adaptec, Inc., a vendor
independent of Microsoft; we make no warranty, implied or otherwise, regarding
these products' performance or reliability.
Additional query words: prodnt
======================================================================
Keywords : kbhw kbHardware
Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW310 kbWinNTSsearch kbWinNTS310 kbWinNTAdvSerSearch kbWinNTAdvServ310 kbWinNTS310search kbWinNT310Search kbWinNTW310Search
Version : 3.1
=============================================================================