Q113349: Client Files for Windows 3.x and Terminal Emulators

Article: Q113349
Product(s): Microsoft SNA Server
Version(s): WINDOWS:2.0,2.1,2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0,4.0 SP1
Operating System(s): 
Keyword(s): kb3rdparty kbsna211sp1 kbsna211sp2 kbsna300sp1 kbsna300sp2 kbsna300sp3 sna4 kbsna400sp1
Last Modified: 12-JUN-2001

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft SNA Server, versions 2.0, 2.1, 2.11, 2.11 SP1, 2.11 SP2, 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 4.0, 4.0 SP1 
-------------------------------------------------------------------------------

Specific files and WIN.INI settings are required when you use independent
vendor Windows-based terminal emulators with SNA Server for Windows NT.

MORE INFORMATION
================

The following executable files should be located in the <snaroot>
directory (where <snaroot> means the directory where your SNA Server for
Windows NT client software is installed). Verify the <snaroot> directory
is in the path statement in your AUTOEXEC.BAT file or put the files in a
directory that is in the path.

  WNAP.EXE     - SNA Windows client.

  WPOPUP.EXE   - Displays popup messages if errors occur.

  SNAVER.EXE   - Displays the version of SNA Server client components
                 (optional).

  WSHOWMEM.EXE - Displays the internal memory tables and settings for
                 diagnostic purposes (optional).

The following dynamic-link library (DLL) files should be located in the
<winroot>\system directory (where <winroot> means the directory
where your Windows 3.x, or Windows for Workgroups 3.xx software is installed).

DLLs for a Novell Netware Network
---------------------------------

  NWCLI.DLL    - SNA client interface for Netware.

  NWNETAPI.DLL - Netware Application Programming Interface (API).

  NWIPXSPX.DLL - Netware IPX/SPX interface.

DLLs for a LAN Manager or Windows for Workgroups Network
--------------------------------------------------------

  LMCLI.DLL    - SNA client interface for LAN Manager/WFW.

Other DLLs
----------

  WDMOD.DLL    - SNA client interface used by WNAP, SNA API's and
                 third-party vendors using the Emulator Interface
                 Specification (EIS).

  WLOGTR.DLL   - Required for logging and trace formatting.

  TOOLHELP.DLL - Used by WNAP to determine if an SNA Server client
                 application has ended.

  WINTRC.DLL   - For message tracing when debugging (optional).

  CTL3D.DLL    - For 3D support. Required by SNAVER.EXE and by SNA Server
                 for Windows NT 3270 and 5250 applets.

  YMGR.DLL     - Yield manager. Required for applications using the
                 DCA/Microsoft Communications Server APPC API.

DLLs for 5250 Terminal Emulation
--------------------------------

  WINAPPC.DLL  - APPC API support for transaction verbs (see Chapter 4 of
                 the "APPC Programmer's Guide").

  WINCSV.DLL   - Common Service Verbs API support.

DLLs for SNA API Support
------------------------

NOTE: Specific DLL files are required for SNA applications which use specific
APIs.

  WINSLI.DLL   - LUA Session Level Interface API support.

  WINRUI.DLL   - LUA Request Unit Interface API support.

  WINCPIC.DLL  - CPI-C API support.

  WINMGT.DLL   - APPC Management Verb API support (see Chapter 3 of the
                 "PPC Programmers Guide").

You also need to verify that the following entries are in the [Wnap] section of
the client's WIN.INI file:

  WBinPath=<snaroot>

  Remote= [ <Netware domain name> | <SNA Server computer name>]

     For a Netware network, this must be set to the domain name where the
     SNA Server for Windows NT computer is running.

  -or-

  For a LAN Manager or Windows for Workgroups network, this entry is optional
  unless the client is located in a different domain than the SNA Server for
  Windows NT server. If this is the case, it must be set to the SNA Server for
  Windows NT computer name.

  NosType= [ LANMAN | NETWARE ] (Type of Network)

  NosSetup= [ LANMAN | WFW | NETWARE ] (Type of client)

  NetSetup=NO

This is an example of a [Wnap] section of the WIN.INI file for Windows for
Workgroups client on a LAN Manager network in the same domain as the SNA Server
for Windows NT server:

  [Wnap]
  WBinPath=C:\SNA
  Remote=
  NosType=LANMAN
  NosSetup=WFW
  NetSetup=NO

The Novell Netware products included here are manufactured by vendors independent
of Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.

Additional query words: wfw wfwg prodsna

======================================================================
Keywords          : kb3rdparty kbsna211sp1 kbsna211sp2 kbsna300sp1 kbsna300sp2 kbsna300sp3 sna4 kbsna400sp1 
Technology        : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ200 kbSNAServ211 kbSNAServ400 kbSNAServ210 kbSNAServ211SP1 kbSNAServ211SP2 kbSNAServ300SP3 kbSNAServ300SP1 kbSNAServ400SP1 kbSNAServ300SP2
Version           : WINDOWS:2.0,2.1,2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0,4.0 SP1

=============================================================================