Q117668: Err Msg: Ring 0 Systems. Virtual 16550 Driver…

Article: Q117668
Product(s): Microsoft Windows 3.x Retail Product
Version(s): 3.1,3.11
Operating System(s): 
Keyword(s): win31
Last Modified: 08-FEB-2002

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows for Workgroups versions 3.1, 3.11 
- Microsoft Windows versions 3.1, 3.11 
- Microsoft Windows 95 
-------------------------------------------------------------------------------

SYMPTOMS
========

You receive the following error message when you start Windows:

  Ring 0 Systems. Virtual 16550 Driver Board was not found in computer. Virtual
  16550 & communication buffering in the DOS box will not work. It may
  cause lost bytes during the data transfer and other problems with
  communication software running under V86 DOS

CAUSE
=====

This error occurs when you:

- Move your modem to another serial port without reconfiguring the driver.

  -or-

- Remove the modem from the computer but do not remove the corresponding
  Digicom Systems Incorporated (DSI) device driver (r0dsicom.drv). This device
  driver replaces COMM.DRV as the Windows serial communications driver and
  displays the error message noted above when it doesn't find the modem.

The following modems use DSI-written device drivers:

- Boca Sound Expression 14.4 VSP

- Cardinal Technologies MVP144DSP

- DSI Connection Series

- PC Logic FAX144DM


WORKAROUND
==========

- If you move the modem to another serial port, run the DSI.EXE program
  included with the modem to reconfigure the adapter. Contact DSI for more
  information and assistance.

- If the modem has been removed, the DSI drivers should be replaced with the
  default Windows drivers to remove the error message.

  The DSI setup program makes the following changes in the [boot] section of the
  SYSTEM.INI file:

       COMM.DRV=r0dsicom.drv

  To replace this DSI driver, change this line to read as follows:

       COMM.DRV=COMM.DRV

  The following changes are made to the [386Enh] section of the SYSTEM.INI file
  by the DSI setup program:

        DEVICE= r0dsivcd.386
        DEVICE= r0dsibuf.386
        DEVICE= r0dsimgr.386


  Remark out or remove the above three lines and add the following to the
  [386Enh] section:

        DEVICE=*VCD
        DEVICE=*combuff

  NOTE: The Connection Series modems require the drivers outlined above for full
  functionality. You should not replace the DSI drivers listed above unless the
  DSI modem is removed from the system. Contact DSI for more information.


MORE INFORMATION
================

The products included here are manufactured by vendors independent of Microsoft;
we make no warranty, implied or otherwise, regarding these products' performance
or reliability.

Additional query words: ring zero one softmodem cardinal win95 win95x

======================================================================
Keywords          : win31 
Technology        : kbAudDeveloper kbWin3xSearch kbWin95search kbWFWSearch kbZNotKeyword3 kbWin310 kbWin311 kbWFW310 kbWFW311
Version           : :3.1,3.11

=============================================================================