Article: Q119213
Product(s): Microsoft Disk Operating System
Version(s): MS-DOS:6.22
Operating System(s):
Keyword(s):
Last Modified: 21-NOV-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft MS-DOS operating system version 6.22
-------------------------------------------------------------------------------
SUMMARY
=======
This article explains how you can run the MS-DOS 6.22 DoubleSpace conversion
setup program from a drive other than a floppy disk drive.
MORE INFORMATION
================
If a floppy disk drive is not present on the system and you want to run the
DoubleSpace-to-DriveSpace conversion setup program, you can run it from the hard
disk drive or any other drive. To do so, the files included with the conversion
program must be located in the root directory of the drive you want to run Setup
from. If the files are not located in the root directory of the drive, you
receive the following message
An error occurred while reading <drive>:\DRVSPACE.MR1
where <drive> is the drive from which you ran SETUP.EXE.
The following files need to be in the root directory:
DBLCDESC TXT 2,460 05-31-94 6:22a
DRVSPACE MR1 512 05-31-94 6:22a
README TXT 2,830 05-31-94 6:22a
SETUP EXE 9,151 05-31-94 6:22a
Additional query words: convert dos msdos mrci stepup step up step-up
======================================================================
Keywords :
Technology : kbMSDOSSearch kbMSDOS622
Version : MS-DOS:6.22
=============================================================================