Article: Q121246
Product(s): Microsoft Disk Operating System
Version(s): MS-DOS:6.0,6.2,6.21,6.22
Operating System(s):
Keyword(s):
Last Modified: 19-NOV-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft MS-DOS operating system versions 6.0, 6.2, 6.21, 6.22
-------------------------------------------------------------------------------
SUMMARY
=======
The following signal descriptions are for the parallel cable pins required to
use Interlnk.
Pin 2: Data Bit 0 Active when High
Pin 3: Data Bit 1 Active when High
Pin 4: Data Bit 2 Active when High
Pin 5: Data Bit 3 Active when High
Pin 6: Data Bit 4 Active when High
Pin 10: Acknowledge Active when Low
Pin 11: Busy Active when High
Pin 12: Out Of Paper Active when High
Pin 13: Select Active when High
Pin 15: Error Active when Low
Pin 25: Ground
MORE INFORMATION
================
Descriptions of parallel and serial cables required to run Interlnk can be found
in MS-DOS Help. For more information, type "help interlnk-- notes" (without the
quotation marks) at the MS-DOS command prompt and then press ENTER.
Additional query words: 6.00 6.20 inter link interlink
======================================================================
Keywords :
Technology : kbMSDOSSearch kbMSDOS621 kbMSDOS622 kbMSDOS620 kbMSDOS600
Version : MS-DOS:6.0,6.2,6.21,6.22
=============================================================================