Q122150: Password Validation to NT Using ODI Drivers

Article: Q122150
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:3.11; winnt:3.1,3.5
Operating System(s): 
Keyword(s): 
Last Modified: 08-AUG-2001

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows for Workgroups version 3.11 
- Microsoft Windows NT Server versions 3.1, 3.5 
- Microsoft Windows NT Workstation versions 3.1, 3.5 
- Microsoft Windows NT Advanced Server, version 3.1 
-------------------------------------------------------------------------------

SYMPTOMS
========

When your Windows for Workgroups 3.11 machine is configured with Novell ODI
drivers, and attempts to be validated by a LAN Manager or Windows NT server, you
receive the following error message:

  No domain server was available to validate your password. You were logged on
  without password validation.

CAUSE
=====

This error occurs when you run NET START FULL before you start Windows for
Workgroups 3.11. When you run NET START FULL with ODI drivers, Windows for
Workgroups uses the IPX transport to obtain validation. Because Windows NT 3.1
does not recognize IPX/SPX (it recognizes IPX/SPX with NetBIOS), Windows NT 3.1
does not validate the client machine.

NOTE: In this case, Windows for Workgroups cannot use NetBEUI and IPX/SPX because
they are protect-mode protocols and cannot be loaded from the MS-DOS command
prompt.

RESOLUTION
==========

To resolve this problem, do one of the following:

- Upgrade to Windows NT Advanced Server version 3.5. Windows NT Advanced Server
  3.5 can use the IPX transport without NetBIOS.

  -or-

- Load ODINSUP and NETBEUI. ODINSUP allows real-mode protocols, such as
  NETBEUI, to load so that the network can communicate with the Windows NT
  domain server through the real-mode protocol. Because Microsoft doesn't
  support the use of ODINSUP, this workaround has not been tested and is not
  supported by Microsoft.

  -or-

- Load the Novell implementation of NetBIOS (NETBIOS.EXE) from the MS-DOS
  command prompt. This workaround has not been tested and is not supported by
  Microsoft.

MORE INFORMATION
================

The products included here are manufactured by vendors independent of Microsoft;
we make no warranty, implied or otherwise, regarding these products' performance
or reliability.

Additional query words: 3.11 3rdparty net ware winnt 3.10 client validation

======================================================================
Keywords          :  
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNT350search kbWinNTW350 kbWinNTW350search kbWinNTW310 kbWinNTSsearch kbWinNTS350 kbWinNTS310 kbWinNTAdvSerSearch kbWinNTAdvServ310 kbWinNTS350search kbWinNTS310search kbAudDeveloper kbWinNT310Search kbWinNTW310Search kbWFWSearch kbWFW311
Version           : WINDOWS:3.11; winnt:3.1,3.5

=============================================================================