Article: Q123486
Product(s): Microsoft Windows 3.x Retail Product
Version(s): WINDOWS:3.11
Operating System(s):
Keyword(s): kbnetserv
Last Modified: 29-OCT-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows for Workgroups version 3.11
-------------------------------------------------------------------------------
SYMPTOMS
========
If you are running only the Enhanced Mode NDIS driver [NDIS3] on your network
interface card, you may have problems loading a real mode protocol such as
Microsoft DLC. At first, a "Setup Error: 320:" message appears warning you that
you have selected a real-mode protocol, but your network card is set up to run
only protected mode protocols.
NOTE: This message also appears when you attempt to install TCP/IP 16-bit
protocol.
If you modify the Network Interface Card driver to include a real mode NDIS2
driver, and load the real mode protocol, the following error message appears:
Network Setup, Setup Error 110: Could not find or open the WIN.INI file.
The file may be missing or read-only. The changed settings will not take
effect.
RESOLUTION
==========
To avoid this problem, do one of the following:
- Before you add the real mode protocol, change the Network Interface Card,
NIC, driver to Real Mode and Enhanced Mode NDIS Driver [NDIS2/NDIS3]. Reboot
the system, then return to Network Setup to add the real mode protocol.
-or-
- Update your installation of Windows for Workgroups with the files from the
Windows NT Server version 3.5 CD-ROM under CLIENTS\WFW\UPDATE. This will
allow a simultaneous update of the NIC NDIS driver and the addition of a real
mode protocol.
Additional query words: wfw wfwg adapter prodwfw 3.11
======================================================================
Keywords : kbnetserv
Technology : kbAudDeveloper kbWFWSearch kbWFW311
Version : WINDOWS:3.11
=============================================================================