Article: Q129236
Product(s): Microsoft Mail For PC Networks
Version(s): WINDOWS:3.2
Operating System(s):
Keyword(s):
Last Modified: 07-NOV-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Mail for PC Networks, version 3.2
-------------------------------------------------------------------------------
SYMPTOMS
========
An External using a USR Courier HST Dual Standard with ASL modem, version 32bis
with ASL modem, or HST with ASL modem and using version 3.2 of the USRHST script
either: fails to initialize or connects successfully on the first call from a
remote client or PO and then fails to answer or answers without connecting on
subsequent calls until rebooted.
CAUSE
=====
The Dip switch settings on the modem may be incorrect. The settings shown in the
header of the version 3.2 USRHST.MDM script are reversed, and if you set them
(or have already set them) according to the version 3.2 script, the problem will
continue.
The setup string in the initialize section of the script may (depending on the
setting of sw's 3, 7, and 8) override the switches and allow the first call to
succeed. However, at the end of the first call, the reset section issues an ATZ
that resets the modem according to the dip switches, and the External ceases to
answer calls until it is forced to re-initialize the modem.
RESOLUTION
==========
In order for the version 3.2 script to work correctly, you need to set the
switches according to the version 3.0 script:
; Filename: usrhst.mdm
; Date : June 17, 1992
; Script : Script file for USRobotics Courier HST dual standard
modem
; Version : V3.0
;
; This modem has a bank of DIP-Switches on the back. These should
; be set at the factory settings or as follows:
;
; QUAD 1 2 3 4 5 6 7 8 9 10
; OFF XXXX X X X X X
; ON X X X X X
Note that switches 2 and 4 are not the factory settings.
The 1-10 switches are defined in the USR documentation as:
Switch Function
-----------------------------------------------------------------------
1 OFF Normal DTR operation
ON DTR always on
2 OFF Verbal result codes
ON Numeric result codes
3 OFF Results suppressed
ON Results enabled
4 OFF Command echo on
ON No command echo
5 OFF Modem answers on first ring
ON Autoanswer disabled
6 OFF CD on active connection
ON CD always on
7 OFF Result codes in originate and answer mode,
ON Result codes in answer mode disabled
8 OFF Command recognition disabled
ON AT command set recognition
9 OFF Modem hangs up on +++
ON Modem does not hang up on +++
10 OFF ATZ loads from NV RAM
ON ATZ loads factory defaults
Additional query words: 3.20
======================================================================
Keywords :
Technology : kbMailSearch kbZNotKeyword3 kbMailPCN320
Version : WINDOWS:3.2
=============================================================================