Q133183: STOP 0x7A with Adaptec 2740A SCSI and 3Com Etherlink III

Article: Q133183
Product(s): Microsoft Windows NT
Version(s): 
Operating System(s): 
Keyword(s): 
Last Modified: 08-AUG-2001

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft Windows NT Workstation version 3.51 
- Microsoft Windows NT Server version 3.51 
-------------------------------------------------------------------------------

SUMMARY
=======

When you use an Adaptec 2740A SCSI controller and a 3Com Etherlink III network
interface card (NIC) in Windows NT 3.51, the following error message appears:

  STOP: 0x0000007a (0x00000103, 0xC0000185, 0x00000000, 0x00043000)
  Kernel_Data_Inpage_Error
  CPU ID:Genuine Intel 5.2.5 IRQ1:1F Sys Version:0xF0000327

CAUSE
=====

This problem occurs if the Adaptec 2740A SCSI controller and the 3Com Etherlink
III NIC are using the same IRQ. The Adaptec 2740A SCSI controller uses a default
IRQ of 10.

RESOLUTION
==========

To correct this problem, configure the IRQ of the 3Com Etherlink III NIC or the
Adaptec 2940A SCSI controller to another, unused IRQ.

The third-party products discussed here are manufactured by vendors independent
of Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.

Additional query words: trap 7A elnkiii

======================================================================
Keywords          :  
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS351 kbWinNTS351search

=============================================================================