Article: Q170049
Product(s): Microsoft Exchange
Version(s): WinNT:4.0,5.0
Operating System(s):
Keyword(s):
Last Modified: 12-MAY-1999
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Exchange Windows 3.x client, versions 4.0, 5.0
-------------------------------------------------------------------------------
SYMPTOMS
========
When you run the Microsoft Exchange Client on an IBM OS/2 version 3.x platform,
the following error may occur when you try to change the password:
The NT Domain password could not be changed. A required action was not
successful due to an unspecified error.
If you press F2, the following message displays:
MS Exch cli 0 - [8100342B]
CAUSE
=====
This error occurs if the OS/2 client is using only the NetBIOS transport. This
behavior is by product design.
WORKAROUND
==========
To initiate the password change to the Windows NT Server, you must have TCP/IP,
SPX, or Named Pipes enabled on the OS/2 client.
======================================================================
Keywords :
Technology : kbExchangeSearch kbExchange500 kbExchange400 kbExchangeClientSearch kbZNotKeyword3
Version : WinNT:4.0,5.0
Issue type : kbbug
=============================================================================