Processor Test Error Codes |
Error Code |
Description |
Recommended Action |
101-xx |
CPU test failed |
Replace the
processor and retest. |
102-xx |
Coprocessor or Weitek Error |
1. Run the Configuration and
Diagnostics Utilities.
2. Replace the processor board and retest. |
103-xx |
DMA page registers test failed |
Replace the system
board and retest. |
104-xx |
Interrupt controller master test
failed |
105-xx |
Port 61 error |
106-xx |
Keyboard controller self-test
failed |
107-xx |
CMOS RAM test failed |
108-xx |
CMOS interrupt test failed |
109-xx |
CMOS clock test failed |
110-xx |
Programmable timer load data test
failed |
113-xx |
Protected mode test failed |
114-01 |
Speaker test failed |
1. Check system configuration.
2. Verify cable connections to speaker.
3. Replace the system board and retest. |
Memory Test Error Codes |
200-xx |
Memory machine ID test failed |
1. Flash the system
ROM and retest.
2. Replace the system board and retest. |
202-xx |
Memory system ROM checksum failed |
203-xx |
Write/Read test failed |
1. Remove the memory
module and retest.
2. Install a new memory module and retest. |
204-xx |
Address test failed |
211-xx |
Random pattern test failed |
214-xx |
Noise test failed |
215-xx |
Random address test failed |
Keyboard Test Error Codes |
300-xx |
Failed ID Test |
1. Check the keyboard
connection. If disconnected, turn off the computer and connect the keyboard. 2. Replace the keyboard and retest.
3. Replace the system board and retest. |
301-xx |
Failed Selftest/Interface Test |
302-xx |
Failed Individual Key Test |
304-xx |
Failed Keyboard Repeat Test |
Parallel Printer Test Error Codes |
401-xx |
Printer failed or not connected |
1. Connect the
printer.
2. Check power to the printer.
3. Install the loop-back connector and retest.
4. Check port and IRQ configuration.
5. Replace the system board and retest. |
402-xx |
Failed Port Test |
403-xx |
Printer pattern test failed |
Diskette Drive Test |
600-xx |
Diskette ID drive
types test
failed |
1.
Replace the diskette media and retest.
2. Check and/or replace the diskette power and signal cables and retest.
3. Replace the diskette drive and retest.
4. Replace the system board and retest. |
601-xx |
Diskette format
failed |
602-xx |
Diskette read test
failed |
603-xx |
Diskette write,
read, compare test failed |
604-xx |
Diskette random read
test failed |
605-xx |
Diskette ID media
failed |
606-xx |
Diskette speed test
failed |
609-xx |
Diskette reset
controller test failed |
610-xx |
Diskette change line
test failed |
697-xx |
Diskette type error |
698-xx |
Diskette drive speed
not within limits |
699-xx |
Diskette drive/media
ID error |
1. Replace media.
2. Run the Configuration and Diagnostics Utilities. |
Serial Test Error Codes |
1101-xx |
Serial port test
failed |
1. Check port
configuration
2. Replace the system board and retest. |
Hard Drive Test Error Codes |
1701-xx |
Hard drive format
test failed |
1. Run
the Configuration and Diagnostics Utilities and verify drive type.
2. Verify that all secondary drives have secondary drive capability.
3. Replace the hard drive and retest.
4. Replace the system board and retest. |
1702-xx |
Hard drive read test
failed |
1703-xx |
Hard drive
write/read/compare test failed |
1704-xx |
Hard drive random
seek test failed |
1705-xx |
Hard drive
controller test failed |
1706-xx |
Hard drive ready
test failed |
1707-xx |
Hard drive
recalibration test failed |
1708-xx |
Hard drive format
bad track test failed |
1709-xx |
Hard drive reset
controller test failed |
1710-xx |
Hard drive park head
test failed |
1715-xx |
Hard drive head
select test failed |
1716-xx |
Hard drive
conditional format test failed |
1717-xx |
Hard drive ECC* test
failed |
1719-xx |
Hard drive power
mode test failed |
1724-xx |
Network preparation
test failed |
1736-xx |
Drive monitoring
test failed |
* ECC = Error Correction Code |
Video Test Error Codes |
501-xx |
Video controller
test failed |
The
following apply to error codes 501-xx through 516-xx: 1.
Disconnect external monitor and test with internal LCD display.
2. Replace the display assembly and retest.
3. Replace the system board and retest. |
502-xx |
Video memory test
failed |
503-xx |
Video attribute test
failed |
504-xx |
Video character set
test failed |
505-xx |
Video 80 × 25 mode
9 × 14 character cell test failed |
506-xx |
Video 80 × 25 mode
8 × 8 character cell test failed |
507-xx |
Video 40 × 25 mode
test failed |
508-xx |
Video 320 × 200
mode color set 0 test failed |
509-xx |
Video 320 × 200
mode color set 1 test failed |
510-xx |
Video 640 × 200
mode test failed |
511-xx |
Video screen memory
page test failed |
512-xx |
Video gray scale
test failed |
514-xx |
Video white screen
test failed |
516-xx |
Video noise pattern
test failed |
2402-xx |
Video memory test
failed |
The
following steps apply to error codes 2402-xx through 2456-xx: 1. Run the Configuration and Diagnostics Utilities.
2. Replace the display assembly and retest.
3. Replace the system board and retest. |
2403-xx |
Video attribute test
failed |
2404-xx |
Video character set
test failed |
2405-xx |
Video 80 × 25 mode
9 × 14 character cell test failed |
2406-xx |
Video 80 × 25 mode
8 × 8 character cell test failed |
2408-xx |
Video 320 × 200
mode color set 0 test failed |
2409-xx |
Video 320 × 200
mode color set 1 test failed |
2410-xx |
Video 640 × 200
mode test failed |
2411-xx |
Video screen memory
page test failed |
2412-xx |
Video gray scale
test failed |
2414-xx |
Video white screen
test failed |
2416-xx |
Video noise pattern
test failed |
2418-xx |
ECG/VGC memory test
failed |
2419-xx |
ECG/VGC ROM checksum
test failed |
1. Run
the Configuration and Diagnostics Utilities.
2. Disconnect external monitor and test with internal LCD display.
3. Replace the display assembly and retest.
4. Replace the system board and retest. |
2421-xx |
ECG/VGC 640 × 200
graphics mode test failed |
2422-xx |
ECG/VGC 640 × 350 16
color set test failed |
2423-xx |
ECG/VGC 640 × 350 64
color set test failed |
2424-xx |
ECG/VGC monochrome
text mode test failed |
2425-xx |
ECG/VGC monochrome
graphics mode test failed |
2431-xx |
640 × 480 graphics
test failure |
2432-xx |
320 × 200 graphics
(256 color mode) test failure |
2448-xx |
Advanced VGA
Controller test failed |
2451-xx |
132-column Advanced
VGA test failed |
2456-xx |
Advanced VGA 256
Color
test failed |
2458-xx |
Advanced VGA BitBLT
test |
The
following step applies to error codes 2458-xx through 2480-xx: Replace the system board and retest. |
2468-xx |
Advanced VGA DAC test |
2477-xx |
Advanced VGA data
path test |
2478-xx |
Advanced VGA BitBLT
test |
2480-xx |
Advanced VGA LineDraw
test |
Audio Test Error Codes |
3206-xx |
Audio System Internal
Error |
Replace the system
board and retest. |
TouchPad/Pointing
Device Interface Test Error Codes |
8601-xx |
Mouse test failed |
1.
Replace the TouchPad and retest.
2. Replace the system board and retest. |
8602-xx |
Interface test failed |
CD Drive Test Error Codes |
3301-xx |
CD drive read test
failed |
1.
Replace the CD and retest.
2. Verify that the speakers are connected.
3. Verify that drivers are loaded and properly installed.
4. Replace the CD drive and retest.
5. Replace the system board and retest. |
3305-xx |
CD drive seek test
failed |
6600-xx |
ID test failed |
6605-xx |
Read test failed |
6608-xx |
Controller test
failed |
6623-xx |
Random read test
failed |