SEARCH CONTACT US SUPPORT SERVICES PRODUCTS STORE
United States    
COMPAQ STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
 

Maintenance & Service Guide
Presario 1600 Series
Models: 1650 and 1655

 | Home Page | Notice | Preface | Product Description | Troubleshooting  
Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications
Pin Assignments
| Battery Pack Operations


gd.gif (12475 bytes)

9. Disconnect the backlight cable attached to the display panel assembly from the connector on the system board. Disconnect the flex cable attached to the display panel assembly from the ZIF connector on the system board.

IMPORTANT:

The flex cable for the 13.3'' TFT display panel will contain a connector which will need to be removed before pulling the flex cable attached to the display panel assembly through the slot on the Upper CPU cover.

10. Gently pull the flex cable attached to the display panel assembly through the slot on the Upper CPU cover and remove the display panel assembly with flex and backlight cable attached.

To replace the display panel assembly, reverse the previous procedures.

NOTE:

When removing the display panel assembly, observe the display panel assembly flex cable routing and position. 

Return to Removal & Replacement Procedures

 
1.800.AT.COMPAQ
 
privacy and legal statement