          PlatiniX-8 BIOS V1.1SLCP release note.
 
This disk contains three files:P8_V11.BIN,README.TXT and AWD803.EXE

1.The checksum of P8_V11.BIN is 8891(Hex) ;

2. How to use AWD803.EXE utility:
   This is a flash memory write/read utility.
IMPORTANT NOTE:
   The AWD803 utility could not correctly run in windows (virtual 8086)
   MS-DOS mode. It must be proceeded with the following steps:
      1.Create a bootable system floppy diskette by typing "FORMAT A:/S"
        from the dos prompt under DOS6.XX or WINDOWS9X environment.
      2.Boot system with diskette.
      3.Then run the AWD803 utility.
Usage:
      AWD803 [BIOSfile1] [BIOSfile2] [/<sw>[/<sw>...]]
     BIOSfile1: New BIOS Name For FLASH Programming
     BIOSfile2: BIOS File For Backing-up the Original BIOS

 <command> function definition:
      /cc: clear CMOS;        /cp: clear PnP;        /cd: clear DMI.
      /sn: No Original BIOS Backup. If this option is chosen:
         Be sure your new BIOS is compatible with your M/B. If not, the system 
         are damaged.
      /sy: Backup Original BIOS to Disk File.
 Examples:
        AWD803 ****.BIN /py/sn/cd/cp

 Warning: 
   Avoid power-off incidently in upgrading procedure, or system would fail
   to reboot!

UPDATE DATE:05/09/2002