Excellent II AWARD PnP BIOS V1.1SL note. 

                    PART I  How to use AWDFLASH.EXE utility
1. Please press F5 to bypass config.sys and autoexec.bat when booting to DOS.

2. Change to drive A: and type in the following command:   
   A:> AWDFLASH E2_V11.BIN  <Enter>

3. On the utility screen, a message "Do you want to save BIOS (Y/N)" will be 
   displayed. If you want to save the BIOS on the motherboard for reference,
   press 'Y' and enter a filename with full path for saving the BIOS on the
   motherboard when the appropriate prompts appear.

4. The utility program asks "Are you sure to program (Y/N)" for confirmation.
   To upgrade BIOS, press 'Y'. After BIOS upgrading is finished, reset the
   system, or turn off the power. The system will boot with new BIOS.

Warning: 
   Avoid turning off power when BIOS upgrade is in progress,  or system 
   would fail to reboot!