The at43311.vxd should be installed prior to connection of the Atmel hub.
In order to install it, the file at43311.vxd should be placed in the
\WINDOWS\SYSTEM directory and the following line should be added to the
system.ini file, in [386Enh] section:

device=at43311.vxd


Using "INSTALL.EXE" :
Install program does everything for you automatically. Boot the system to
Windows95. Open a DOS window, place the diskette in the drive, run the
INSTALL.EXE program.

After the installation is complete, reboot the system.
