|
|
| |
| PC Server 500 - Restoring the
disk-array configuration |
| Applicable
countries/regions |
| Service hints
& tips |
Restoring
the Disk-Array Configuration
To restore the disk-array
configuration information in the RAID adapter EEPROM module,
use the RAID controller diskette and an up-to-date Disk Array
Configuration Backup diskette.
Note
Because
dynamic changes in the configuration of your disk array occur
due to hot-spare drive replacement or other drive maintenance
activity, the configuration backup information on the diskette
might be different from that in the adapter. It is important
that you back up the disk-array configuration information
frequently, to keep the backup information on the diskette
current.
To restore the RAID configuration
information:
1.
Insert the IBM RAID controller diskette into the primary drive
and power-on the system. If the system already is on, press
Ctrl+ Alt+ Del.
2. Select Advanced functions from the Main
Menu.
3. Select Restore config. from diskette.
4. Follow
the instructions on the screen. |
| Document id: DDSE-3UXN2H
|
| Last modified: 1999-01-25
|
| Copyright © 2002 IBM Corporation
| | |
.gif){kind=small}
