|
2.169 bytes |
Service Hints & Tips |
Document ID: YAST-3JWKG4 |
TP - 755CD/CE/CSE/CV/CDV/CX, 760, 765 - How to Enable the MWave Modem in DOS Using FASTCFG
Applicable to: World-Wide
How to run FASTCFG:
1. At the DOS prompt type FASTCFG and press the enter key. If you get bad command, type CD C:\MWW\DLL and press the enter key. Retry the FASTCFG comand. (This normally indicates an improper installation. Mwave should be removed and properly reinstalled.)
2. By using the UP and DOWN arrow keys, select Advanced Modem and press the enter key.
3. At the "Use these settings when rebooting system" prompt, press the Y key.
This document applies to all models of machine type 9546, but only to the enhanced models of the 9545.
|
Search Keywords |
| |
|
Hint Category |
Mwave | |
|
Date Created |
12-07-97 | |
|
Last Updated |
31-03-98 | |
|
Revision Date |
12-03-99 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 755CE/CSE, ThinkPad 755CX, ThinkPad 755CV, ThinkPad 755CD, ThinkPad 755CDV, ThinkPad 760C, ThinkPad 760E, ThinkPad 760CD, ThinkPad 760ED, ThinkPad 760XD, ThinkPad 760XL, ThinkPad 765D | |
|
Machine Type |
9545, 9546 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |