|
4.880 bytes |
Service Hints & Tips |
Document ID: JBAR-3WKP8Q |
IBM PC300PL (Type 6562) - No-power condition after installing an adapter card
Applicable to: World-Wide
SYMPTOM:
After installing an adapter in the riser card, the system will not power on.
PROBLEM ISOLATION AIDS:
This tip applies to IBM PC300PL Series 6562 desktop systems.
IBM PC300PL Series 6592 mini tower systems are not affected.
FIX:
Perform the following steps to verify the no-power condition.
1. Remove the adapter and attempt to restart the system. If the system restarts successfully, suspect a failing adapter.
2. If the no-power condition persists after installing a known good adapter, replace the riser card with FRU P/N01K4444.
NOTE: New FRU P/N01K4444 is supplied with an EMC clip. Instructions for placement and installation of the EMC clip are included with FRU P/N01K4444. Servicers must install this EMC clip when replacing the riser card.
SAS KEYWORDS:
PSY2 PSY2POWER PSVP PSVPPOWER
CDT CDTPOWER DEAD SYSTEM D/T6562
6562 UNCLASSIFIED
|
Search Keywords |
| |
|
Document Category |
Power, Retain | |
|
Date Created |
20-07-98 | |
|
Last Updated |
21-07-98 | |
|
Revision Date |
20-07-99 | |
|
Brand |
IBM PC | |
|
Product Family |
PC 300PL | |
|
Machine Type |
6562 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H024704 | |
|
Reverse Doclinks |