|
3.087 bytes |
Service Hints & Tips |
Document ID: LWIK-3P6HR6 |
TP General - Token Ring adapter fails when Dial-Up adapter is configured with the same IP address
Applicable to: World-Wide
SYMPTOM:
There are no error messages, but when attempting to use a token-ring adapter or a dial-up adapter when both are setup with the same TCP/IP address, the dial-up adapter works but the token ring card fails . If no IP address is specified for the dial-up adapter then the token ring adapter works fine.
CONFIGURATION:
Any ThinkPad running Windows 95 OSR2 with a token ring adapter and a dial-up adapter both configured to use the same IP address.
RESOLUTION:
A different IP address needs to be setup for the dial-up connection as well as the LAN connection.
ADDITIONAL INFORMATION:
In windows 95 OSR0 (and OSR1), the TCP/IP stack only allows one adapter at a time to be active. Windows 95 OSR2 allows multiple adapters to be active (as long as they use different IPs).
|
Search Keywords |
| |
|
Hint Category |
Networking | |
|
Date Created |
25-11-97 | |
|
Last Updated |
12-06-98 | |
|
Revision Date |
08-06-99 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 310, ThinkPad 365X/XD, ThinkPad 365C/CS, ThinkPad 365CD/CSD, ThinkPad 365E/ED, ThinkPad 380, ThinkPad 385D, ThinkPad 560, ThinkPad 560E, ThinkPad 560X, ThinkPad 760C, ThinkPad 760E, ThinkPad 760CD, ThinkPad 760L/LD, ThinkPad 760ED, ThinkPad 760XD, ThinkPad 760EL/ELD, ThinkPad 760XL, ThinkPad 765L, ThinkPad 765D, ThinkPad 770 | |
|
Machine Type |
2600, 2625, 2635, 2640, 9546, 9547, 9548, 9549 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |