|
2.024 bytes |
Service Hints & Tips |
Document ID: RMIE-3HWD2E |
IBM ValuePoint - Power button fails if cover not locked
Applicable to: World-Wide
Service Information:
PS/ValuePoint 6384, 6384/D, 6384 P60/D, 6484 and 6482 desktop 5x5 systems utilise the same basic design for the top cover assembly. This design requires that the top cover is mounted on the side rails and the cover release latch is in the flush/latched position. The cover keylock assembly should be in the locked position to properly mate the push button with the power supply switch mounted on the base frame assembly.
Failure to install the top cover assembly in this manner could allow the top cover to be moved out of position enough to cause the power on/off button not to function. This information is contained in the "Installing Options" publication shipped with each system.
SAS KEYWORDS:
VALUE POINT PS/VP PSVP D/T6484
D/T6482 P60D IPO PSVPPART
PSY2 PSVPPWR PSY2PART PSY2PWR
6384
|
Search Keywords |
| |
|
Hint Category |
Retain, Power | |
|
Date Created |
05-06-95 | |
|
Last Updated |
19-05-98 | |
|
Revision Date |
29-04-99 | |
|
Brand |
IBM PC | |
|
Product Family |
ValuePoint | |
|
Machine Type |
6384, 6484, 6482 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H127069 | |
|
Reverse Doclinks |