|
2.043 bytes |
Service Hints & Tips |
Document ID: LWIK-3XRLMR |
TP 600 - No audio after reloading the system for the Recovery CD (model 45U only)
Applicable to: Canada, United States
SYMPTOMS:
After using the Recovery CD to reload the computer the following symptoms are experienced:
WaveTable MIDI Synthesis is not audible.
Dial-tone and modem negotiation tones are not audible.
Speakerphone is not useable / not audible.
CONFIGURATION:
ThinkPad 600 (model 45U only) after performing a reload from the Recovery CD.
SOLUTION:
The "Serial In Balance" should be set well above minimum to a setting that allows ACP modem generated sounds to be heard (the default Crystal installation should also do this automatically). Also, the "Serial In Balance" should not have "mute" checked. These settings can be found from Start / Programs / Accessories / Entertainment / Volume Control . In order to display the "Serial In Balance" control, you may need to select Options / Properties and, under the Show the following volume controls selection, check the Serial In check box.
|
Search Keywords |
| |
|
Document Category |
Audio | |
|
Date Created |
27-08-98 | |
|
Last Updated |
10-09-98 | |
|
Revision Date |
08-09-99 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 600 | |
|
Machine Type |
2645 | |
|
Model |
45U | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |