|
1.953 bytes |
Service Hints & Tips |
Document ID: YAST-3W7S7L |
4.2GB Deskstar 5 EIDE Hard Drive - Problem plugging in the IDE 2-drop cable
Applicable to: World-Wide
Product: Deskstar 5 4.2GB EIDE Hard drive
Option p/n: 01K1278
FRU p/n: 02K1146
Problem:
IDE hard drive cable will not plug into IBM PC300GL, machine type 6591, 6X6 series riser card (secondary IDE connector). Clips on the IDE 2-drop cable prevent the cable from passing through the cut-out in the system's chassis to plug into the back of the Riser.
Resolution:
If you remove the clip (which allows you to lengthen the cable and obtain access to the second IDE connector on the IDE cable), it will plug into the riser.
|
Search Keywords |
| |
|
Hint Category |
Hardware Installation/Configuration | |
|
Date Created |
08-07-98 | |
|
Last Updated |
25-11-98 | |
|
Revision Date |
19-11-99 | |
|
Brand |
IBM Options | |
|
Product Family |
Hard Drives | |
|
Machine Type |
4.x GB | |
|
Model |
01K1278 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |