7.706 bytes

System Support Disks

Document ID: PMYS-3M6QZ7

Aptiva - Upgrade for Aptiva Communications Center under Windows 95 (Spain)

Applicable to: Spain


P/N
accw1sp
accw2sp
accw3sp
accw4sp
accread

Description
Installing this upgrade will repair problems related with earlier versions of the application. This upgrade is ONLY for Aptiva models Mxx/Axx/Cxx with Windows95. Mxx and Axx models must have Mwave driver versions 60AE7 or 20D installed. Do NOT use this upgrade unless the Mwave drivers on your system are version 60AE7 or 20D. (Spain)

P/N
accw1sp
accw2sp
accw3sp
accw4sp
accread

Name & Size (bytes)
accw1sp.exe : 1347691
accw2sp.exe : 1516884
accw3sp.exe : 1513554
accw4sp.exe : 1509107
accread.txt : 5847

WWW URL(s)
ftp://ftp.infania.net/pccbbs/aptiva/accw1sp.exe
ftp://ftp.infania.net/pccbbs/aptiva/accw2sp.exe
ftp://ftp.infania.net/pccbbs/aptiva/accw3sp.exe
ftp://ftp.infania.net/pccbbs/aptiva/accw4sp.exe
ftp://ftp.infania.net/pccbbs/aptiva/accread.txt

The files contained in this document have been archived.

Double-click here for more information on the Archive process - .

The files can be obtained

From the IBM PC Company ftp site on the Internet at the address noted above,
(copy & paste the address into your Web Browser, or, if you are connected to an Internotes or Domino server, double-click on the address to hot-link directly to the URL. Note that the file type on the ftp site may be a different file type from the file originally attached to this document - eg .ZIP instead of .EXE)

From the Archive Database -
LN V3 - IBM PC Service Information Archive Database - CD1 1997
LN V4 - IBM PC Service Information Archive Database - CD1a 1997
- : or as indicated below:-

This document was archived on the database - PC Service Info Archive 1998/2 -- Replica ID : 802565E7004DC09A

Note: If the doclink below does not function properly, try using the preview doclink button on the action bar to access the archived document.

Use this doclink to retrieve the document from the 1998 Archive Database :

Disk Release Date:

26-09-97

Disk Version/Release:

1.6.1

Additional Information:

To find out what version of Mwave you currently have, do the following:
1. Click on "Start", then click "RUN".

2. Type: C:\MWW\MANAGER\MWLEVELS.EXE

3. Press "Enter".

4. A screen will come up with information about your drivers. Check the line which reads: "INSTALLATION=". The line should read as follows:
INSTALLATION=TPOEMMAS60AE7
or
INSTALLATION=W95TAPMAS20D
or
INSTALLATION=W95TAPMAS20D MCI

5. If this line shows another installation version you MUST download and install the upgrade to the Mwave drivers. To obtain the latest Mwave drivers (Version 20D), click here . Installation instructions can be found in the README.TXT file on the diskette once it is created. You may view the README.TXT file by using a text editor such as notepad.

Creating the Communications Center installation diskettes:
1. From the Windows 95 desktop, click "Start", "Find", "Files or Folders". In the "Named:" field, type "accw" , and click "Find Now".

2. A list of the files will appear in the lower half of the find window. Locate the ACCW1SP.EXE file in the list, and double-click on its icon.

3. A DOS window will appear prompting you to insert a blank diskette in drive A, and then press Enter. Insert a floppy diskette into drive A, and press "Enter". Diskette 1 will be created. This process will take about 2 minutes. When the files have been extracted, press 'N' when asked if you want to make another copy, and then close the DOS window. Remove the diskette from drive A, and label it as "Installation Disk #1."

4. Repeat the step above for diskettes 2, 3, and 4. In each case, double-click on the ACCWxxx.EXE (ACCW2SP.EXE for diskette #2, etc.) file in the Find window, and then insert a blank diskette and press "Enter".

5. When you are finished, you will have created 4 separate installation diskettes.

Installing the Communications Center Update:
1. Insert Installation Disk #1 (the disk created from ACCW1SP.EXE) into drive A.

2. Click "Start", "Run", type "a:\setup" in the run dialog box, and press "Enter".

3. The Communications Center setup program will initialize. Click "Next" on the "Welcome" window that appears.

4. Click 'Next' again on the "Select Program Folder" screen.

5. The Communications Center files will begin copying from diskette #1 to the hard drive. You will be prompted to insert diskettes 2, 3, and 4 as they are needed.

6. When the installations is complete, a "Restart Windows" message box will appear stating that you will need to restart Windows before using the updated Communications Center. Remove the floppy diskette and click "OK" to restart Windows. The Communications Center update has now been installed.

Search Keywords

Disk Category

Software Updates

Date Created

22-09-97

Last Updated

15-01-99

Revision Date

15-01-2000

Brand

IBM Aptiva

Product Family

Aptiva

Machine Type

2134, 2144, 2168, 2176

Model

120; 121; 123; 131; 132; 133; 141; 142; 152; 154; 161; 162; 163; 171; 172; 182; 352; 354; 355; 357; 364; 362; 356; 372; 374; 381; 382; 384; 392; 442; 447; 443; 449; 454

TypeModel

Retain Tip (if applicable)

Reverse Doclinks
and Admin Purposes