|
1.688 bytes |
Service Hints & Tips |
Document ID: GSMH-3A2MCJ |
IBM ValuePoint - Matrox VLB video adapter problem
Applicable to: World-Wide
Symptom:
PS/ValuePoint Performance Series systems may exhibit a symptom of no video, parity errors or system halted errors with a Matrox VLB Video adapter installed.
Problem Isolation Aids:
PS/ValuePoint Performance Series systems using an OEM video adapter instead of the on board S3 864 video chipset, should have the Enable/Disable jumper located on the left side of the board to the rear of the memory SIMM sockets, in the "Disable" position.
Move the Enable/Disable jumper to the "Enable" position and retest for video. If the system does display video, this tip applies.
Fix:
Relocate the video ROM address for the Matrox VLB card to the "AC00" memory region.
|
Search Keywords |
| |
|
Hint Category |
Adapter Cards | |
|
Date Created |
03-09-96 | |
|
Last Updated |
19-05-98 | |
|
Revision Date |
29-04-99 | |
|
Brand |
IBM PC | |
|
Product Family |
ValuePoint | |
|
Machine Type |
6472, 6482, 6484, 6492, 6494 | |
|
Model |
various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |