|
2.270 bytes |
Service Hints & Tips |
Document ID: DSHY-3UPRHA |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
PowerPC - Fails To Restore From MKSYSB Tape
Applicable to: World-Wide
Service Information:
Restoring a mksysb tape fails when using AIX 4.1.1 CDROM to boot Failure happens minutes into restore with message:
/usr/bin/ksh: /preload: not found
The workaround is to have a DOS formatted diskette in the drive with a file named "preload". Procedure is as follows:
1. create a DOS format diskette as follows :
< insert diskette in drive >
dosformat
cd /tmp
cat > preload <<EOF
#!/bin/ksh
exit 0
EOF
doswrite preload preload
< take diskette out >
Note: Do not use the "-a" flag for doswrite
2. Boot the 40P from CD to the install menus
3. Choose 3 - Maintenance
4. Choose 4 - Install from backup
5. Insert the DOS diskette in drive
6. Choose the input device ( one of the tape drives )
7. The system will then read information off of the tape for a little while, and then come up with a new install menu From here on, the installation would be similar to the other systems - non-40P.
8. Choose 2 - Change Install Settings
9. Verify that the settings for the Backup install are correct and then continue with the installation as normal.
|
Search Keywords |
| |
|
Hint Category |
Networking | |
|
Date Created |
09-03-95 | |
|
Last Updated |
22-05-98 | |
|
Revision Date |
21-05-2000 | |
|
Brand |
IBM PowerPC | |
|
Product Family |
PowerPC | |
|
Machine Type |
Various | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |