|
3.293 bytes |
Service Hints & Tips |
Document ID: DDSE-3QPNU2 |
PC Server 330 - Boot error after adding ServeRAID II adapter
Applicable to: World-Wide
Boot Error After Adding ServeRAID II Adapter
Symptom:
"Non system disk" or "No Boot Device found" errors reported after installing a ServeRAID II adapter in any of the Primary PCI slots.
-- OR --
The system boots to a bootable device attached to the ServeRAID II adapter instead of booting to a bootable device attached to the integrated ServeRAID controller.
Problem Isolation Aids:
The system is a PC Server 330 type 8640 model PT0/PB0/PM0 that is configured to boot to a device attached to the integrated ServerRAID controller.
A ServeRAID II adapter is located in a Primary PCI slot (PCI slots 1,2, and 3 are Primary PCI slots). This adapter may or may not have a bootable device attached to it.
Fix:
Move the ServeRAID II adapter to the Secondary PCI slots so the System will boot to the integrated ServeRAID controller.
Note: PCI slots 4,5, and 6 are Secondary PCI slots.
SAS Keywords:
PSY2, PSY2BOOT, UNCLASSIFIED, D/T8640, PT0, PB0, PM0, SERVERAID II
|
Search Keywords |
PSY2, PSY2BOOT, UNCLASSIFIED, D/T8640, PT0, PB0, PM0, SERVERAID II | |
|
Hint Category |
RAID, Error Messages, Lock-up/Hang, Retain | |
|
Date Created |
13-01-98 | |
|
Last Updated |
18-02-99 | |
|
Revision Date |
18-02-2000 | |
|
Brand |
IBM PC Server | |
|
Product Family |
PC Server 330, ServeRAID | |
|
Machine Type |
8640, Various | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H162191 | |
|
Reverse Doclinks |