|
3.914 bytes |
Service Hints & Tips |
Document ID: GSMH-3DACEX |
IBM ValuePoint - Token Ring adapter settings for 6384
Applicable to: World-Wide
Service Information:
Following are recommended configuration settings for the IBM Token Ring adapters used in any model PS/ValuePoint 6384 system.
These switch settings assume there are no memory address or interrupt conflicts with other adapters.
Token Ring Adapter (Long Card P/N83x9144 and P/N83x9147)
-Set interrupt level to '2'
-Set ROM address to 'D400'
SWITCH BLOCK 1 - 1 2 3 4 5 6 7 8
0 1 0 1 0 1 1 1
SWITCH BLOCK 2 - 1 2 3 4 5 6 7 8
0 0 1 0 1 1 1 1
0=OFF 1=ON
Token Ring Adapter (Short Card P/N16F0463)
-Set interrupt level to '2'
-Set ROM address to 'D400'
SWITCHES - 1 2 3 4 5 6 7 8 9 10 11 12
0 1 0 1 0 1 1 1 0 0 X X
0=OFF 1=ON
X-NOT USED
Token Ring 16/4 Adapter without RPL (Short Card P/N93F0334)
-Set Interrupt Level to '2'
-Set ROM Address to 'D400'
SWITCHES - 1 2 3 4 5 6 7 8 9 10 11 12
0 1 0 1 0 1 1 1 0 0 1 X
0=OFF 1=ON
X-RING SPEED
Note:
These settings are only recommended. Other interrupt levels and ROM address settings are available. Refer to the guide to operations for the adapter being used for further information. Use of the configuration settings may conflict with user applications, and/or adapters. Please consult your consumer/LAN administrator, or before altering existing configuration settings.
If the customer is using 'EMM386.EXE', the following command used in the 'CONFIG.SYS' file is recommended if the above configuration is used.
"DEVICE=C: DOS EMM386.EXE X=D400=DAFF"
SAS KEYWORDS:
PSVP VALUE POINT 93F0334 16F0463
PSY2 PSVPADPT PSVPCOMM PSY2ADPT
PSY2COMM
|
Search Keywords |
| |
|
Hint Category |
Adapter Cards, Retain | |
|
Date Created |
22-02-94 | |
|
Last Updated |
26-05-98 | |
|
Revision Date |
19-05-99 | |
|
Brand |
IBM PC | |
|
Product Family |
ValuePoint | |
|
Machine Type |
6384 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H032967 | |
|
Reverse Doclinks |