|
2.511 bytes |
Service Hints & Tips |
Document ID: MCGN-42AS4U |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
Cross Brand - 1 MB VRAM aperture base address disabled
Applicable to: AP-S, Canada, LA, United States
Source: RETAIN tip H107321
Abstract:
1 MB VRAM aperture base address disabled
TEXT:
After installing more than 8MB of memory in a model 95XX, 85XX, you may observe that the 1 MB VRAM aperture, listed under the XGA-2 display adapter, has been disabled.
This is normal and is not a defect. No parts should be replaced.
Further information about the aperture may be obtained by using on-line help from the Change Configuration menu (F1 key).
PS/2 system video memory apertures are discussed in detail in the "Personal System/2 Hardware Interface Technical Reference - Video Subsystems" manual. This manual, S42G-2193, may be ordered on-line through Pub Order.
If 16 MB of memory is installed, the system will count less than the 16 MB. This occurs after disabling the video aperture.
SAS KEYWORDS:
PSY2, XGA, PS2, ENABLE, D/T9577, D/T9576, XGA/2, D/T9595, D/T9585, APERTURE, 1MB, 9577, 9576, 9595, 9557, D/T9557, D/T8557, D/T8556, 8557, 8556, D/T8595, 8595, 8580, D/T8580
|
Search Keywords |
PSY2, XGA, PS2, ENABLE, D/T9577, D/T9576, XGA/2, D/T9595, D/T9585, APERTURE, 1MB, 9577, 9576, 9595, 9557, D/T9557, D/T8557, D/T8556, 8557, 8556, D/T8595, 8595, 8580, D/T8580 | |
|
Hint Category |
Retain | |
|
Date Created |
16-11-98 | |
|
Last Updated |
17-11-98 | |
|
Revision Date |
17-11-99 | |
|
Brand |
IBM PC, IBM PC Server | |
|
Product Family |
PS/2, Server 85, Server 95 | |
|
Machine Type |
8556, 8557, 8580, 8595, 9557, 9576, 9577, 9595, 9585 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H107321 | |
|
Reverse Doclinks |
Date created: O93/01/13 |