RS/6000 SP 9076 System and Service Processor Firmware Update

Applies to: IBM RS/6000 SP 9076 332Mhz SMP Thin/Wide Nodes

NOTE: This firmware is for RS/6000 SP 9076 332Mhz SMP Thin/Wide Nodes only.

        DO NOT INSTALL FIRMWARE FOR M/T 7043 ON THIS NODE!

The latest firmware level is:

For instructions on obtaining this firmware, see the chart at the bottom of this file.
 


Revision History

System Firmware
Level Description
WIL00125
  • Corrects Incorrect Node Location Codes
  • Supports IBM 4-Port Base TX Ethernet PCI Adapter
  • Miscellaneous Fixes For SMS Menu Problems
  • Adds Network Boot Related Fixes
WIL99308
  • Adds Boot Support For Dual Ultra2 SCSI (F/C 6205)
WIL99287
  • Fixes Checkstops And FRU Callout Related To SRN 651-619
  • Fixes FRU Callout For SRN 651-724
  • Fixes ATM Adapters That Were Defined But Not Available
  • Fixes Network Problems With CISCO Routers / CHSR
  • Fixes Problems Reporting POST Errors
  • Allows Config Menu To Handle 200+ Devices
WIL99071
  • Corrects System Hang At E1DC
  • Disables SP Control Power Off During ROS F/W Update
  • Miscellaneous RAS Serviceability Fixes

Service Processor Firmware
wc991027
  • Adds Miscellaneous Mfg Related Fixes
wc990831
  • Adds NVRAM Clear / Checkstop Analysis To Menus
  • Potentially Fixes Once-A-Minute Sysplanar0 Errors
wc990315
  • Corrects EPOW_SUS_CHRP Messages In Errore Log
  • Fixes halt -q Shutdown
wc981228
  • Corrects Processor Checkstop Associated with SRN 651-610 Or Error Codes 4B2xxx01 and 4B2xxx02

How to get a copy of the latest firmware level:
 
System Status Contact
Under Warranty Call IBM CE
IBM Maintenance Agreement Call IBM CE
Third Party / Self Maintainers In the US: Contact Rose Cisneros at (972) 280-6511

Outside the US: Contact your local IBM Branch Office

Have the following information available when calling.

Customer Name:
System S/N:
Node type: 604/604e, 332MHz, or Power3
Address to Ship to:
( No overnight delivery to P.O. Box entry )
Contact to Receive:
Telephone #:

Privacy | Legal | Contact IBM