| adfutil |
| |
Provides the capability to merge Micro Channel information for PS/2 adapters with the AIX Version 3 Configuration Database. |
| bterm |
| |
Emulates terminals in bidirectional bus (BIDI) mode. |
| cancel |
| |
Cancels requests to a line printer. |
| captoinfo |
| |
Converts a termcap file to a terminfo descriptor file. |
| cfgmgr |
| |
Configures devices by running the programs specified in the Configuration Rules object class. |
| chcons |
| |
Redirects the system console to a specified device or file to be effective on the next start of the system. |
| chdev |
| |
Changes the characteristics of a device. |
| chdisp |
| |
Changes the display used by the
low function terminal (LFT) subsystem
. |
| chfont |
| |
Changes the default font for a display. |
| chkbd |
| |
Changes the default keyboard map used by the high function terminal Subsystem at system startup. |
| clear |
| |
Clears the terminal screen. |
| devnm |
| |
Names a device. |
| diag |
| |
Performs hardware problem determination. |
| digest |
| |
Converts the ASCII form of the /etc/qconfig file into the /etc/qconfig.bin file, a binary version of the queue configuration used by the qdaemon command. |
| dscreen |
| |
Starts the Dynamic Screen utility. |
| enable |
| |
Enables a printer queue |
| fdformat |
| |
Formats diskettes. |
| flcopy |
| |
Copies to and from diskettes. |
| fold |
| |
Folds long lines for finite-width output device. |
| format |
| |
Formats diskettes. |
| getty |
| |
Sets the characteristics of ports. |
| hplj |
| |
Post-processes the troff command output for the HP LaserJet Series printers. |
| ibm3812 |
| |
Post-processes the troff command output for the 3816 Pageprinter and the 3812 Model 2 Pageprinter. |
| ibm3816 |
| |
Post-processes the troff command output for the 3816 Pageprinter and the 3812 Model 2 Pageprinter. |
| ibm5587G |
| |
Post-processes troff command output for the 5587G printer with the (32x32/24x24) cartridge installed. |
| iconv |
| |
Converts the encoding of characters from one code page encoding scheme to another. |
| infocmp |
| |
Manages terminfo descriptions. |
| iostat |
| |
Reports Central Processing Unit (CPU) statistics and input/output statistics for tty, disks, and CD-ROMs. |
| keycomp |
| |
Compiles a keyboard mapping file into an input method keymap file. |
| keymaps |
| |
Displays INed command key layout for all keyboards. |
| lp |
| |
Sends requests to a line printer. |
| lpr |
| |
Enqueues print jobs. |
| lpstat |
| |
Displays line printer status information. |
| lptest |
| |
Generates the line printer ripple pattern. |
| lsattr |
| |
Displays attribute characteristics and possible values of attributes for devices in the system. |
| lscfg |
| |
Displays diagnostic information about a device. |
| lsconn |
| |
Displays the connections a given device, or kind of device, can accept. |
| lscons |
| |
Writes the name of the console device to standard output. |
| lsdev |
| |
Displays devices in the system and their characteristics. |
| lsdisp |
| |
Lists the displays currently available on the system. |
| lsdsmitd |
| |
Displays an alpha-ordered list of the domains for DSMIT. |
| lsdsmitm |
| |
Displays an alphabetically ordered list of machines in DSMIT. |
| lsfont |
| |
Lists the fonts available for use by the display. |
| lskbd |
| |
Lists the keyboard maps currently available to the Low Function Terminal (LFT) subsystem. |
| lsparent |
| |
Displays the possible parent devices that accept a specified connection type or device. |
| mkdev |
| |
Adds a device to the system. |
| mkfont |
| |
Adds the font code associated with a display to the system. |
| mknod |
| |
Creates a special file. |
| mt (BSD) |
| |
Gives subcommands to streaming tape device. |
| panel20 |
| |
Diagnoses activity between an HIA and the 5080 Control Unit. |
| pdelay |
| |
Enables or reports the availability of delayed login ports. |
| pdisable |
| |
Disables login ports. |
| penable |
| |
Enables or reports the availability of login ports. |
| phold |
| |
Disables or reports the availability of login ports on hold. |
| pioattred |
| |
Provides a way to format and edit attributes in a virtual printer. |
| piobe |
| |
Print job manager for the printer backend. |
| pioburst |
| |
Generates burst pages (header and trailer pages) for printer output. |
| piocnvt |
| |
Expands or contracts a predefined definition or virtual printer definition. |
| piodigest |
| |
Digests attribute values for a virtual printer definition into memory image and stores the memory image in a file. |
| piofontin |
| |
Copies fonts from a multilingual font diskette. |
| pioformat |
| |
Drives a printer formatter. |
| piofquote |
| |
Converts certain control characters destined for PostScript printers. |
| pioout |
| |
Printer backend's device driver interface program. |
| piopredef |
| |
Creates a predefined printer data stream definition. |
| portmir |
| |
Allows one TTY stream (monitor) to attach to another TTY stream (target) and monitor the user session that is taking place on that stream. |
| pr |
| |
Writes a file to standard output. |
| pshare |
| |
Enables or reports the availability of shared login ports. |
| pstart |
| |
Enables or reports the availability of login ports (normal, shared, and delayed). |
| pstat |
| |
Interprets the contents of the various system tables and writes it to standard output. |
| reset |
| |
Initializes terminals. |
| rmdev |
| |
Removes a device from the system. |
| rmt |
| |
Allows remote access to magnetic tape devices. |
| script |
| |
Makes a typescript of a terminal session. |
| setmaps |
| |
Sets terminal maps or code setmaps. |
| splp |
| |
Changes or displays printer driver settings. |
| stty |
| |
Sets, resets, and reports workstation operating parameters. |
| stty-cxma |
| |
Sends and reports the terminal options for 128-port asynchronous controllers. |
| swapon |
| |
Specifies additional devices for paging and swapping. |
| swcons |
| |
Redirects, temporarily, the system console output to a specified device or file. |
| sysdumpdev |
| |
Changes the primary or secondary dump device designation in a running system. |
| tabs |
| |
Sets tab stops on terminals. |
| tapechk |
| |
Performs consistency checking of the streaming tape device. |
| tcopy |
| |
Copies a magnetic tape. |
| tctl |
| |
Gives commands to a streaming tape device. |
| termdef |
| |
Queries terminal characteristics. |
| tput |
| |
Queries the terminal discriptor files in the terminfo database. |
| tset |
| |
Initializes terminals. |
| tsm |
| |
Provides terminal state management. |
| tty |
| |
Writes to standard output the full pathname of your terminal. |
| automount |
| |
Mounts NFS file systems automatically. |
| chfs |
| |
Changes attributes of a file system. |
| chps |
| |
Changes attributes of a paging space. |
| chvfs |
| |
Changes entries in the /etc/vfs file. |
| crfs |
| |
Adds a file system. |
| crvfs |
| |
Creates entries in the /etc/vfs file. |
| defrags |
| |
Increases a file system's contiguous free space. |
| df |
| |
Reports information about space on file systems. |
| dfsck |
| |
Checks file system consistency and interactively repairs the file system. |
| dosformat |
| |
Formats a DOS diskette. |
| dumpfs |
| |
Dumps file system information. |
| ff |
| |
Lists the file names and statistics for a file system. |
| fsck |
| |
Checks file system consistency and interactively repairs the file system. |
| fsdb |
| |
Debugs file systems. |
| istat |
| |
Examines i-node numbers. |
| lsfs |
| |
Displays the characteristics of file systems. |
| mkfs |
| |
Makes a file system. |
| mklost+found |
| |
Creates a lost and found directory for the fsck command. |
| mkproto |
| |
Constructs a prototype file system. |
| mount |
| |
Makes a file system available for use. |
| ncheck |
| |
Generates path names from i-node numbers. |
| proto |
| |
Constructs a prototype file for a file system. |
| rmfs |
| |
Removes a file system, any logical volume on which it resides, and the associated stanza in the /etc/filesystems file. |
| rrestore |
| |
Copies previously backed up file systems from a remote machine's device to the local machine. |
| skulker |
| |
Cleans up file systems by removing unwanted files. |
| umount |
| |
Unmounts a previously mounted file system, directory, or file. |
| unmount |
| |
Unmounts a previously mounted file system, directory, or file. |
| update |
| |
Periodically updates the super block. |
| chlv |
| |
Changes only the characteristics of a logical volume. |
| chpv |
| |
Changes the characteristics of a physical volume in a volume group. |
| chvg |
| |
Sets the characteristics of a volume group. |
| cplv |
| |
Copies the contents of a logical volume to a new logical volume. |
| exportvg |
| |
Exports the definition of a volume group from a set of physical volumes. |
| extendlv |
| |
Increases the size of a logical volume by adding unallocated physical partitions from within the volume group. |
| extendvg |
| |
Adds physical volumes to a volume group. |
| importvg |
| |
Imports a new volume group definition from a set of physical volumes. |
| lslv |
| |
Displays information about a logical volume. |
| lspv |
| |
Displays information about a physical volume within a volume group. |
| lsvg |
| |
Displays information about volume groups. |
| migratepv |
| |
Moves allocated physical partitions from one physical volume to one or more other physical volumes. |
| mirrorvg |
| |
Mirrors all the logical volumes that exist on a given volume group. |
| mklv |
| |
Creates a logical volume. |
| mklvcopy |
| |
Provides copies of data within the logical volume. |
| mkvg |
| |
Creates a volume group. |
| mkvgdata |
| |
Creates a file containing information about a volume group for use by the savevg and restvg commands. |
| redefinevg |
| |
Redefines the set of physical volumes of the given volume group in the device configuration database. |
| reducevg |
| |
Removes physical volumes from a volume group. |
| reorgvg |
| |
Reorganizes the physical partition allocation for a volume group. |
| restvg |
| |
Restores the user volume group and all it containers and files, as specified in the /tmp/vgdata/vgname/vgname.data file contained within the backup image created by the savevg command. |
| rmlv |
| |
Removes logical volumes from a volume group. |
| rmlvcopy |
| |
Removes copies from a logical volume. |
| savevg |
| |
Finds and backs up all file belonging to a specified volume group. |
| synclvodm |
| |
Synchronizes or rebuilds the logical volume control block, the device configuration database, and the volume group descriptor areas on the physical volumes. |
| syncvg |
| |
Synchronizes logical volume copies that are not current. |
| unmirrorvg |
| |
Removes the mirrors that exist on volume groups or specified disks. |
| varyoffvg |
| |
Deactivates a volume group. |
| varyonvg |
| |
Activates a volume group. |