Newsgroups: comp.periphs.scsi
Path: lth.se!sunic!mcsun!uunet!maxed!ed
From: ed@maxed.amg.com (Ed Whittemore)
Subject: Re: Adaptec 1522/ASW410 CDROM driver support for Toshiba CDROM
Organization: American Micro Group, Ft. Lee  NJ
Date: Sun, 23 Aug 1992 09:16:27 GMT
Message-ID: <BtFJ3z.5yx@maxed.amg.com>
References: <oqpjmog@zuni.esd.sgi.com>
Lines: 30

In article <oqpjmog@zuni.esd.sgi.com> jegm@esd.sgi.com writes:
>On a 386 PC running DOS:-
>
>I have been trying to get the CDROM driver to recognise the 3301 toshiba
>CDROM drive, with no luck. The driver doesn't install and says no valid
>device can be found. The drive is happily sitting on the SCSI bus, and I
>can run a VERIFY successfully on it. I can't believe that the 3301 is so
>different from the 3201 which Apdaptec says is supported. I am using the
>latest CDROM drivers V2.1 from the BBS. (Upgrade only). There is a /I
>switch for these drivers which is supposed to turn on ident checking,
>presumably this means that ident checking is disabled by default, but 
>either way it doesn't recognise the Toshiba drive as something it can
>talk to.
>
>Has anyone managed to get this to work. Are CDROM drives that dissimilar,
>that every driver has to be written for every make and model??
>
>Thanks for any help
>
>-- 
>Jim Morris, Email: jegm@esd.sgi.com  Voice: (415) 390-5136

Yes we have the TXM 3301B and E units working. No problem. Suggest you
check your install.

Ed Whittemore   uupsi!maxed!ed   ed@maxed.amg.com
American Micro Group, Inc.   201-944-3293
-- 
Ed Whittemore   uunet!maxed!ed   ed@maxed.amg.com
American Micro Group, Inc.   201-944-3293
