

>From: rjn@hpfcso.HP.COM (Bob Niland)
Newsgroups: comp.graphics
Subject: HPGL Specification
Message-ID: <8990001@hpfcso.HP.COM>
Date: 10 Jan 90 20:07:31 GMT

Organization: Hewlett-Packard, Fort Collins, CO, USA


re: In article <13326@silica.BBN.COM> hlison@bbn.com (Herb Lison) writes:
> 
> Does any documentation exist for the HPGL specification?  If so,
> where can I get a copy?
> 

For HP-GL (-I):

Start with the programming manual for the plotter(s) you have.  Add one
copy of the "Plotter Comparison Guide", HP pub number 5954-7124.  There
are differences between HP-GL(-I) plotters.


For HP-GL/2 (pubs available Feb '90):

HP-GL/2 Reference Guide               5959-9733
HP-GL/2 Comparision Guide (hardware)  5959-9734

If you are an Independent Software Vendor, you can also get information
about HP's plotter ISV program from Cheryl Carrasco, at HP San Diego
Division, (619) 592-4697.

Regards,                                              Hewlett-Packard
Bob Niland                                            3404 East Harmony Road
rjn%hpfcrjn@hplabs.HP.COM                             Fort Collins
UUCP: [hplabs|hpu*!hpfcse]!hpfcla!rjn                 CO          80525-9599


 