Caller-ID component. (new version)
16bit component retrieves full CLID information using a voice modem
Fully tested in the UK with Hayes modems (Hayes Accura etc)
retrieves:-
Type (voice etc)
Date
Time
Telephone number

Just drop on form double click component and the procedure returns 
'identification' string which contains the above information.


For this component to function as intended you MUST have the 
Caller line identification service enabled on your telephone line also your
modem must be able to retrieve this information in your country.
You can check your modem by typing at#cid=1 <return>
if your modem returns 'OK' then the chipset supports the component in its
original configuration.
If your modem returns nothing it could be that the modem has a different 
initialisation string. If this is the case identify the command and change the 
initialisation property on the component.

Please register because it cost me a fortune on telephone calls to get it right!

SWREG 14111

Uploaded by author(ApjH)  101765,1115.
