TQRich Quickreport component

TERMS: 
This is a shareware product. It is fully functional and has no expiration. 
If you find this component useful (I think you might) then kindly send me $15 for my 
efforts. You may then use this component throughout whatever code you may dream up with 
no royalties or exclusions whatsoever.

You also agree not to use this component or its code as the basis for creating a
competitive product....


DISCLAIMER: 
 Use at your own risk!
 By using this component, you agree that I am absolved of any and all problems, 
 losses or whatever undesireable results may happen which may occur from the use of 
 this component. If this is unacceptable, don't use it and delete it from 
 you computer. 


DISTRIBUTION:
 Please feel free to share this component with a friend or post it anywhere, provided that
 you distribute it AS IS, in its entirety.


 If you feel the need for source code, This will cost you $50, and is contingent that you
 will not distribute it!


INSTALLATION:
 Install QRich.DCU as you would any Delphi component.
 Note: The component will appear on the Quickreport pallete page.

USE:
 1) Put a QuickReport component and a QuickReport band on a form.
 2) Put a TQrich component on the Band.
 3) Place a Richedit control on the form.
 4) Set the TQRich's Richedit property to the Richedit control you just added.
    (The TQRich will resize it's height..don't worry, thats normal)
 5) If you want it framed, set frame to tru.
 6) if you don't want the band its on to grow when its contents grow, set GrowBand to False.

    Any opertions affecting the contents of the Richedit control will now be reflected
    in the TQRich component.

   Note: the band will grow to the height of the tallest Qrich on the band, but will 
         not shrink past the original height of the band , provided you do not change
         the height of the band at run time.




------------------
Don Higgins
32 Mill Lane 
Westbrook, Maine 04092
75262.2743@compuserve.com