H&S Technology, Inc.
P.O. Box 5152
Katy, TX  77491-5152

Welcome to H&S Technology, Inc.'s WINFTP DLL. WINFTP DLL is a File Transfer
Protocol (FTP) Application Programming Interface (API) for Windows 3.x development 
toolkit.  This API allows you to integrate FTP functions into your application seamlessly. 
Using this API, you can transfer files between systems anywhere in the world.  All 
you need is a WINSOCK.DLL from your TCP/IP software supplier.

Please read the LICENSE.WRI file first.

In order to use WINFTP.DLL, you will need to 
run setup to properly install the software first.  The DLL will not 
function properly unless you perform the following installation process 
correctly.  Begin the installation from Windows. 

Microsoft ACCESS Users:
If you are experiencing problem with errors "openning file" or "writing to file", you
may want to use the Windows SDK function SetHandleCount(nHandle), a KERNEL function,
to increase the number of file handles (default is 20).


Note: Please take a moment to locate your serial number and 
registration key on the installation diskette.  If you are installing for 
evaluation only, then you do not need the serial number and 
registration key, just click OK when you are asked for serial number 
and registration key.

Installing WINFTP.DLL.

To begin the install process from a distribution diskette:
1. Insert the Winftp disk in your floppy drive.
2. Select Run from the Program Manager File Menu.
3. Type X:\SETUP in the Command Line text box, substituting your 
floppy drive's letter for X (for example, if your floppy driver letter is 
A, you'd type A:\SETUP).
4. Click OK.
5. Follow the instructions on the screens.
6. After you have finished installing,  add the WINFTP.DLL in your 
search PATH or copy it to your Windows directory.

To begin the install process from a ZIP file:
1. Create a temporary directory and copy the zip file into the 
   temporary directory.
2. Unzip the file with PKUNZIP winftp.zip.
3. Select Run from the Program Manager File Menu.
4. Type <PATH>\SETUP in the Command Line text box, substituting 
the temporary directory for <PATH> (for example, if your temporary 
directory is C:\TEMP, you'd type C:\TEMP\SETUP).
5. Click OK.
6. Follow the instructions on the screens.
7. After you have finished installing,  add the WINFTP.DLL in your 
search PATH or copy it to your Windows directory.



 