Introduction
------------

This readme document contains the latest update information about the
Video Package for Video Blaster FS200 card in OS/2

Package Information
-------------------

The complete Video Package includes
 
   o  MCD, VSD and PDD drivers for Video Overlay and Digital Video
   o  Video Blaster Setup and Video Kit applications
   o  Readme file and licensing agreement

The following is a brief description of the various files in the diskette :

   o  CTVIDEO.ICO          - Icon file for Video Blaster Folder
   o  OVLYMCD.DLL          - Media Control Device driver for Video Overlay
   o  VBFSVSD.DLL          - Vendor Specific Device Driver
   o  VBFS200.SYS          - Physical Device Driver

   o  VBFSSTUP.EXE         - Video Blaster FS200 Setup Program
   o  VBFSSTUP.HLP         - Video Blaster FS200 Setup Help file
   o  VBFSSTUP.ICO         - Icon file for Video Blaster FS200 Setup
   o  README.VBS           - Readme file for Video Blaster FS200 Setup

   o  VKIT.EXE             - Video Kit Program
   o  VKIT.HLP             - Video Kit Help file
   o  VKIT.ICO             - Icon file for Video Kit
   o  README.VBK           - Readme file for Video Kit

   o  VBFSSET.EXE          - Video Blaster FS200 Configure Program
   o  VBFSSET.HLP          - Video Blaster FS200 Configure Help file
   o  VBFSSET.ICO          - Icon file for Video Blaster FS200 Configure

   o  README.TXT           - This file
   o  LICENSE.TXT          - Creative Software License

Installation Instructions
-------------------------
 
To install the Video Overlay Driver :

a. Run the program INSTALL.EXE from OS/2 command prompt.
   This program can be found in the Diskette provided.
   => The 'Selective Installation Utility' dialog box appears.

b. Select the features to be installed.

c. Click the INSTALL button to begin installation.
   => The 'Installation Status' dialog box appears.

d. Click the YES button to proceed with the installation when the
   'Warning' dialog box appears.
   => The 'Video Blaster FS200 Card Setup' dialog box appears.

e. Click the spin button to set the :
      - Interrupt       5, 6, 7, 10(default), 11, 12, 14 or 15
      - Port Address    680, 6A0, 6C0, 6D4(default), 71C, 720,
                        740, 760, 780, 7A0, 7C0 or 7E0 
      
      => The installation is successfully completed when you are prompted
         to shutdown and reboot the system.
      => The original CONFIG.SYS, MMPM2.INI and MMPMMMIO.INI are backed
         up to CONFIG.$$$, MMPM2.$$$ and MMPMMMIO.$$$ respectively.

f. Reboot your system.
