Introduction
------------

This readme document contains the latest update information about the
Video Package for Video Blaster SE100 card in OS/2.

Package Information
-------------------

The complete Video Package includes
 
   o  MCD, VSD and PDD drivers for Video Overlay and Digital Video
   o  Video Blaster Setup and Video Kit applications
   o  Readme file and licensing agreement

The following is a brief description of the various files in the diskette :

   o  CTVIDEO.ICO          - Icon file for Video Blaster Folder
   o  OVLYMCD.DLL          - Media Control Device driver for Video Overlay
   o  VBVSD.DLL            - Vendor Specific Device Driver
   o  VBSE100.SYS          - Physical Device Driver

   o  VBSESTUP.EXE         - Video Blaster SE100 Setup Program
   o  VBSESTUP.HLP         - Video Blaster SE100 Setup Help file
   o  VBSESTUP.ICO         - Icon file for Video Blaster SE100 Setup

   o  VKIT.EXE             - Video Kit Program
   o  VKIT.HLP             - Video Kit Help file
   o  VKIT.ICO             - Icon file for Video Kit
   o  README.VBK           - Readme file for Video Kit

   o  README.VSE           - This file
   o  LICENSE.TXT          - Creative Software License

Installation Instructions
-------------------------
 
To install the Video Blaster SE100 Drivers :

a. Run the program INSTALL.EXE from OS/2 command prompt.
   This program can be found in the Diskette provided.
   => The 'Selective Installation Utility' dialog box appears.

b. Select the features to be installed.

c. Click the INSTALL button to begin installation.
   => The 'Installation Status' dialog box appears.

d. Click the YES button to proceed with the installation when the
   'Warning' dialog box appears.
   => The 'Video Blaster SE100 Card Setup' dialog box appears.

e. Click the spin button to set the :
      - Interrupt          5, 10(default), 11, 12, or 15
      - Port Address       690, 6F0, 710, 718(default) or 780
      - Memory base addr   DISABLED (i.e. use I/O map), B000, b400,
                           D000, D400, D800, DC00, 9, 10, 11, 12,
                           13(default), 14, or 15
      
      => The installation is successfully completed when you are prompted
         to shutdown and reboot the system.
      => The original CONFIG.SYS and MMPM2.INI are backed up to CONFIG.$$$
         and MMPM2.$$$ respectively.

f. Reboot your system.

Limitation of Video Blaster SE100 OS/2 drivers
----------------------------------------------

   o  Can support a resolution up to 800x600.
   o  Can support up to 256 colors only.
   o  Can capture motion video of 160x120 at 20 fps.
   o  Supports both ISA and VESA Local Bus based VGA cards.
