---------------------
About Files to update
---------------------

 Below is a list of updated DLL (SNDBLST.DLL) for each Sound Blaster card.
  1) SB.300        - Sound Blaster 1.0 or 1.5
  2) SB2_0.300     - Sound Blaster 2.0
  3) SBPRO.300     - Sound Blaster Pro

 SBPMIX30.EXE - Stereo mixer that is supported by the new DLL for SB Pro.

Note : Users can either update the DLL by using INSTDLL.EXE or do their
       own copy and rename.

-------------------------------
Using INSTDLL.EXE to update DLL
-------------------------------

INSTDLL.EXE can rename and install the selected DLL into Windows directory.

Assumptions - In the following procedure the DRIVE is assumed to be A.
              If you are using other drive, just change the drive letter
              accordingly.
            - The DLLs is in the same directory as INSTDLL.EXE.

 Procedure to Run INSTDLL.EXE
  1) Starts up Windows 3.0.
  2) Select the File menu of Windows Program Manager then select Run.
  3) Type A:INSTDLL.EXE in the Command Line, then
  4) Click the OK button.

 Procedure to update the DLL
  1) Choose the desired DLL (See "About Files to update" to confirm).
     note: you may also click the "Check DLL" button to find out which
           Sound Blaster card the selected DLL supports.
  2) Click the "Install DLL" button to update.

--------------------------------
Manually copy and rename the DLL
--------------------------------

For example, if you have a Sound Blaster Pro, the new DLLs are in drive A,
and your SNDBLST.DLL is in C:\WINDOWS, then your DOS command will be:

    copy a:sbpro.300 c:\windows\sndblst.dll

---------------------------
For Sound Blaster Pro Owner
---------------------------

Please delete SBMIXER.EXE and use SBPMIX30.EXE from now onwards.

----------------------------
For Sound Blaster Developers
----------------------------

You should be using SBPRO.300 for application development.

