
 Area: SUPERBBS 
  Msg#: 2034                                         Date: 01-30-93  13:48
  From: Philipp Lange                                Read: Yes    Replied: No 
    To: David Silver                                 Mark:                     
  Subj: CD ROM and SBBS1.16B

 -=> Philipp Lange drooled this drivel to David Silver about CD ROM and SBBS1.16B on 01-30-93  13:48 <=-

 PL> Hi David!

 PL> 28 Jan 93, David Silver schreibt an Philipp Lange:
 
 DS> You are correct.  It is the attempted updating of the download counters
 DS> that causes the hang up.  Aki is WELL aware of it and, we've been informed
 DS> by Len Morgan, that  CDROM compatibility is number one on his (Aki's) list
 DS> for the 1.17 release.

 PL> Hmmm. CDROM compatibility is okay and fine. But the problem CD ROM
 PL> users are experiencing now is not a matter of a missing option but a
 PL> matter of a major bug. As I said, why does SBBS find correctly the
 PL> path to my CD-ROM-Files-BBS, respectivley Files.001- Files.050 on my
 PL> harddrive, for example when searching files, looking into archives,
 PL> etc. but then skips the information of the correct path and tries to
 PL> write on the CD? I hope I can make myself understood :-) SBBS takes
 PL> everything from the correct files.bbs but only after Downloads it
 PL> tries to freshen up the wrong Files.BBS.... 
 PL>> My second problem is probably easier to solve. Since downloading via
 PL>> SBBS from CD-ROM should not be allowed, I had to work it out, that a
 PL>> global download would have only access to my fileareas on the
 PL>> harddisk. Therefore I disabled in the filearea configuration all
 PL>> Options with 'Download allowed', but nonetheless, the user had still
 PL>> the possibility to perform a global download with the CD-ROM areas
 PL>> included....
 
 DS> There really is no need to do this.  EFT and SBBS can share the same
 DS> files.bbs (or whatever you have them named in your file area config)
 DS> without a problem. You don't need to enable the special EFT CDROM area
 DS> options unless you want to. My users have the choice of downloading CDROM
 DS> files directly from the BBS or EFT.

 PL> Huh? But if a user performs a download (no matter global or from the
 PL> current area) from a CD, SBBS hangs up. The one and only way I found
 PL> yet, was to use EFT - so I had to disable the global download option
 PL> built-in SBBS. 
 DS>  Both options work like a charm.  Now,
 DS> to speed up CDROM file finds, a goodly amount of available expanded memory
 DS> comes in very handy.   My MSCDEX line in my autoexec.bat is:
 
 DS> c:\qemm\loadhi /r:2 C:\dos\MSCDEX.EXE /D:MSCD010  /L:H /E /M:256 /V

 PL> Thank You!! I will try that!
 
 DS> I use QEMM to load it high to begin with and give it a 512k buffer to
 DS> store the dir/file names into - using the last command in autoexec.bat:
 DS> wis h:xan_*.*

 PL> This one I don't understand.
 PL> Wis = name of the utility?
 PL> h = Drive ?
 PL> xan_*.*  ?


 PL> Hmm. sounds interesting. Tell me the full name of the utility and I
 PL> will request it. But, please, explain it to me again... 
 PL> Hmm. With filerequest I found another solution: I took every file from
 PL> the CD-ROM in the magiclist. Now FrontDoor finds the file much faster,
 PL> but the disadvantage is, that Frequest with Wildcards are not possible
 PL> anymore...:-( 
 DS> Hopefully, you'll find some of this info useful.  Everything works fine
 DS> here with this setup.  As I have a total of 4 CDROM drives online, I had
 DS> the "option" of donating a 2meg buffer to MSCDEX and searching for all
 DS> files on all CDs prior to DV calling up the BBS, or, using a file door.

 PL> ??? I don't get this either (shame on me...). I thought you use EFT as
 PL> a File Door (or is there a difference between FileDoor and File
 PL> Transfer Door?). And why are you running it before starting DesqView?
 PL> I don't understand the use of it (sorry...). 
 DS> I went for the latter and STRONGLY recommend using ACFILES.  It is (in my
 DS> estimation) the most full featured bang for the buck (all of 15 bucks to
 DS> register) file transfer program I've ever come across.  If anything I've
 DS> written is unclear, please feel free to point it/them out to me and I'll
 DS> be happy to clarify.

 PL> Yes, please to reply.... What exactly now is ACFILES.... When does the
 PL> update with the CDROM compatibiliy come out.... Will I get rich and
 PL> famous ... Where is my Installation Disk.... Will I stop asking stupid
 PL> questions? 
 PL> You see, lots of questions :-))))


 PL> Bis denn, Philipp

 PL> -!- NwF 1/c
 PL>  ! Origin: Die Schotterbox Passau (Tel: 0851 - 75 30 94) (2:246/245)
 PL> 1 



 Area: SUPERBBS 
  Msg#: 2030                                         Date: 01-28-93  16:54
  From: Tim Smith                                    Read: Yes    Replied: No 
    To: Jon Greaves                                  Mark:                     
  Subj: Re: CD Rom/SBBS/Tagging

 -=> Tim Smith drooled this drivel to Jon Greaves about Re: CD Rom/SBBS/Tagging on 01-28-93  16:54 <=-

 -=> Quoting Jon Greaves to Scott Amerland <=-
 
 JG> Greetings Scott!
 
 JG> Monday January 18 1993, Scott Amerland writes to Jon Greaves:
 
 SA> 8-)I have implemented the suggestions (caching with the CD Rom
 SA> 8-)device driver) and file tagging now takes under 11 sec's (was 45
 
 SA> How did you do that? I am having the same problems with the 45 seconds or
 SA> better on tags... Thanks for your help...
 
 JG> I just added the following line to my autoexec.bat (the /m parameter
 JG> is the important one), I required a meg of cache (EMS) to allow for
 JG> the size of the CD, you may be able to get away with less.  From a
 JG> reboot the cache is empty so I use a filefinder to locate a file in
 JG> the last area of the bbs (to fill the cache).  My CD has a VERY slow
 JG> seek time (its a Mitsumi), you might find a quicker responce on your
 JG> system. 
 JG> [autoexec.bat]
 JG> c:\dos\MSCDEX.EXE /D:MSCD001 /M:1024 /E /V
 TS> ^^^^^^^
 TS> Aaaaa, This sets a 2 meg cache.
 TS> each number is 2k, 512 would be a 1
 TS> meg cache.

 TS> ... Boldly going forward because we simply can't find reverse
 TS> -!- Blue Wave/SBBS v2.10 [NR]
 TS>  ! Origin: Bob's Bulldog Express..On The Cutting Edge!  (1:110/380.0)
 TS> 1 



 Area: SUPERBBS 
  Msg#: 1029                                         Date: 01-26-93  22:59
  From: Laurence Forbes                              Read: Yes    Replied: No 
    To: Jeremy Browne                                Mark:                     
  Subj: Limits

 -=> Laurence Forbes drooled this drivel to Jeremy Browne about Limits on 01-26-93  22:59 <=-

 LF> .:|:. In a message to All on 18-01-93 from Jeremy Browne:
 
 JB> Can anyone suggest why my SBBS 1.16b has suddenly taken to
 JB> giving people 15000 minutes time in the TL entry on the status
 JB> bar, irrespective what security level they have? Only Sysop is
 JB> configured for this while all the rest are 1 hour or less!
 JB>
 LF> Hi Jeremy,

 LF> Check that you have those security level describe in your
 LF> LIMITS.BBS file. This is done via the Config file.

 LF> It could have been that you accidentially wiped out these security
 LF> level while doing some manual maintenance.

 LF> If the security level doesn't exist, SBBS will give them access to
 LF> the highest security level ... being your SysOp security level.

 LF> Laurence |:-)  
 LF> 

 LF> -!- FMail 0.92+
 LF>  ! Origin: Neighbourhood BBS - Victoria, Australia +613-434-6348 
 LF> (3:633/254) 1 



 Area: SUPERBBS 
  Msg#: 749             Local                        Date: 01-30-93  18:34
  From: Len Morgan                                   Read: Yes    Replied: No 
    To: Mark Billinge                                Mark:                     
  Subj: Name Changing

 -=> Len Morgan drooled this drivel to Mark Billinge about Name Changing on 01-30-93  18:34 <=-

 LM> Hello Mark,

 LM> Friday January 22 1993, Mark Billinge writes to All:
 
 MB> Is there some way I can get my BBS name changed and not have to
 MB> re-register SBBS?  I'm fed up with the current name...

 LM> If possible, contact the registration site from whom you registered,
 LM> if not, any registration site and submit the following: 
 LM> 1. The name you registered as sysop.
 LM> 2. Your key code number.
 LM> 3. Your Old BBS name.
 LM> 4. The New BBS name.

 LM> Len

 LM> -!- GoldED 2.40+
 LM>  ! Origin: SBBS - Zone 1 Reg/Supt Site Coordinator (916) 920-1288
 LM> (1:203/730) 



 Area: SUPERBBS 
  Msg#: 782             Local                        Date: 02-03-93  18:31
  From: Len Morgan                                   Read: Yes    Replied: No 
    To: All                                          Mark:                     
  Subj: BBS Name Change

 -=> Len Morgan drooled this drivel to All about BBS Name Change on 02-03-93  18:31 <=-

 LM> Hello All,

 LM> Any user who wishes to change the name of their bbs, may do so by
 LM> submitting the request to your (or any) registration site.  You will
 LM> need to submit a handling fee of $5, your old bbs name, new bbs name
 LM> (exactually as you want it spelled, and your bbs name will be changed.
 LM> No sysop name changes are permitted.  The turn around time is from 7
 LM> to 14 days. 
 LM> Len

 LM> -!- GoldED 2.41.B0108+
 LM>  ! Origin: SBBS Western U.S. Reg/Support Site (916) 920-1288
 LM> (1:203/730)  



 Area: SUPERBBS 
  Msg#: 1217                                         Date: 01-31-93  16:58
  From: Frank Hemmelder                              Read: Yes    Replied: No 
    To: Tom Scott                                    Mark:                     
  Subj: Scaning For Viruses In Sb

 -=> Frank Hemmelder drooled this drivel to Tom Scott about Scaning For Viruses In Sb on 01-31-93  16:58 <=-

 TS>I have McAfee's SCAN 9.11 VER 100 online, and when I use the command in the
 TS>files areas to scan a file for virus's I always get a DOS ERROR 2, then it
 TS>says the file is ok and returns to my menu.

 FH> Have you setup scan to only scan executables?

 FH> Best methode for scan is not to put anything on the virusline in the
 FH> config and SBBS will use SCAN if it is in your path. But make sure
 FH> your TEMP and WORK dir are setup correctly.

 FH> CU, Frank.
 FH> Home of the SuperBBS docs.
 FH> -!- GEcho 1.00/beta+
 FH>  ! Origin: NNN SuperBBS - SuperNet Host NL - 31.3480.24801 
 FH> (2:500/239) 



 Area: SUPERBBS 
  Msg#: 2752                                         Date: 02-02-93  22:01
  From: David Hardinge                               Read: Yes    Replied: No 
    To: Tom Scott                                    Mark:                     
  Subj: Scaning for Viruses in SBBS

 -=> David Hardinge drooled this drivel to Tom Scott about Scaning for Viruses in SBBS on 02-02-93  22:01 <=-

 TS>  Hello.. I have a question I hope someone can answer for me.
 TS>
 TS> In the Config, I first had the path to my scan.exe and then %2,
 TS> then I changed it to just %2 when I got that DOS ERROR 2, and

 DH> In my config I use:

 DH> c:\dos\scan.exe %1

 DH> Try that, it works fine for me....

 DH> David Hardinge, SysOp


 DH> -!- GEcho 1.00
 DH>  ! Origin: Typed ON-LINE at DUCK'S BBS (2:2400/850)
 DH> 60



 Area: SUPERBBS 
  Msg#: 880             Rec'd                        Date: 02-04-93  19:10
  From: Denny Vandemaele                             Read: Yes    Replied: No 
    To: Singh Khanna                                 Mark:                     
  Subj: SBBS and Telix

 -=> Denny Vandemaele drooled this drivel to Singh Khanna about SBBS and Telix on 02-04-93  19:10 <=-

 >  only to SBBS. When they go to logon, they get the '+0' in the
 > name field.

 DV> It's a combination of Sbbs and Telix.

 DV> It is the ENQ string.  You must have it set on in your sbbs config
 DV> under the yes/no settings: Output ^E Character  NO
 DV> Telix just happens to be advanced enough as well as sbbs that they
 DV> both handle the ENQ. I used to have that problem when I logged onto
 DV> other SBBS boards if the sysop did not know what this option meant.
 DV> Hope this helps. 
 DV> -!- FMail 0.92
 DV>  ! Origin: Manna From Heaven is Here Today! (616)372-9946
 DV> (1:2201/24.1) 1 



 Area: SUPERBBS 
  Msg#: 615                                          Date: 02-01-93  11:48
  From: Jonathan Holmes                              Read: Yes    Replied: No 
    To: Tom Barstow                                  Mark:                     
  Subj: Archive Extractor

 -=> Jonathan Holmes drooled this drivel to Tom Barstow about Archive Extractor on 02-01-93  11:48 <=-

 JH> *** Tom Barstow was heard whispering this to All on 26-Jan-93 ***
 
 TB> Whats a good program to look at archives in the BBS and
 TB> download one program from the archive.  Like zipmaster but that
 TB> covers more than one archive?  Who's got it for download?

 JH> 60  /F                    E       5
 JH> 61  c:\superbbs\temp@N    V       5
 JH> 32  c:\superbbs\temp@N    2       5

 JH> Use menu type 60 to extract file to temp directory for the current
 JH> line. 
 JH> Menu type 61 : Rearchive the file(s) that you want from that archive,
 JH> or any other archive. 
 JH> Menu type 32 : Download from the tempory dir. Use the @N command to
 JH> point to the current line temp dir in a multinode setup. 
 JH> NO NEED for any external utilities.

 JH> Jonathan.


 JH> -!- FMail beta+
 JH>  ! Origin:  Have you seen my BBS? It's SUPER! (3:635/570)
 JH> 1 



 Area: SUPERBBS 
  Msg#: 3499                                         Date: 02-05-93  21:48
  From: Jeremy Browne                                Read: Yes    Replied: No 
    To: Brendan Keyport                              Mark:                     
  Subj: Bug... ?!?

 -=> Jeremy Browne drooled this drivel to Brendan Keyport about Bug... ?!? on 02-05-93  21:48 <=-

 JB> * Reply to a Brendan Keyport's original msg to All on 23-Jan-93
 
 BK> I found a interesting Bug... when I set the sbbsovr enviroment
 BK> varible, I get a overlay error -2...

 JB> Did you set the WHOLE path, INCLUDING the filename? eg
 JB> SET SBBSOVR=C:\SBBS\OVRSBBS.OVR

 JB> ?? :-)

 JB> Jeremy 

 JB> -!- SuperBBS 1.16 (Reg)
 JB>  ! Origin: Shaking Hands BBS,UK (2:252/160)
 JB> 60



 Area: SUPERBBS 
  Msg#: 1349            Rec'd Local                  Date: 02-08-93  15:09
  From: Len Morgan                                   Read: Yes    Replied: No 
    To: Kelly Cruise                                 Mark:                     
  Subj: Doors and SBBS 1.17

 -=> Len Morgan drooled this drivel to Kelly Cruise about Doors and SBBS 1.17 on 02-08-93  15:09 <=-

 LM> Hello Kelly,

 LM> Monday February 08 1993, Kelly Cruise writes to All:
 
 KC> Okay, I know I'm messin up something somewhere, but I can't figure it out.
 KC> I have installed doors on my system, and I can get the screens on the
 KC> local system, but no go to the remote call in systems. I have re-direction
 KC> set to com2 where my modem is. Is there anything else I need to look at? I
 KC> am using a type 7 drop, and they do start. Just no video on the remote
 KC> end. Kel

 LM> Some games do not see the com port and have to have a program like
 LM> GATEWAY to make them output to the comport.  Most games, now, are
 LM> writtten with the I/O direction programs to not only use the comport
 LM> but to sample it for baud rate. If not, the game will see the locked
 LM> baud rate (if any) and not the users baud rate.  Your redirection to
 LM> com 2 doesn't affect the door, only your local video.  Try using a
 LM> redirection program like GATEWAY. 
 LM> Len

 LM> -!- GoldED 2.41.B0108+
 LM>  ! Origin: QST BBS Sbbs Reg/Support Site HST/DS (916) 920-1288
 LM> (1:203/730)  



 Area: SUPERBBS 
  Msg#: 3503                                         Date: 02-05-93  22:19
  From: Jeremy Browne                                Read: Yes    Replied: No 
    To: Ryan Shaw                                    Mark:                     
  Subj: hotkeys

 -=> Jeremy Browne drooled this drivel to Ryan Shaw about hotkeys on 02-05-93  22:19 <=-

 RS> Is it possible to use either the <enter> or the <esc> key as a
 RS> hotkey? Thanks in advance for any help on this!

 JB> Yes, I use both - however, I don't think that SMENU or SBBSMENU allow
 JB> you to  enter them directly - so I put a character like ^ or } or ~
 JB> and after saving  the menu, I change the character in hex using Norton
 JB> Utilities or similar,  changing to hex 13 for <ENTER> & hex 26 for
 <ESC> (have I remembered those  values right? :-)) 
 JB> It's very nice to use e.g <ESC> to back out or <ENTER> to complete
 JB> looking at a limited-topic menu.

 JB> Jeremy 

 JB> -!- SuperBBS 1.16 (Reg)
 JB>  ! Origin: Shaking Hands BBS,UK (2:252/160)
 JB> 60



 Area: SUPERBBS 
  Msg#: 912                                          Date: 02-06-93  17:29
  From: Sam Wyatt                                    Read: Yes    Replied: No 
    To: Frank Hemmelder                              Mark:                     
  Subj: Init Strings Modems

 -=> Sam Wyatt drooled this drivel to Frank Hemmelder about Init Strings Modems on 02-06-93  17:29 <=-

 FH> But for the documentation v1.18 I need the following items:
 FH>
 FH> A.  Modem initialisation strings

 SW> Hello Frank.  I was running a very uncommon modem for a while, a Hayes
 SW> Optima 9600 external.  You wouldn't think it would be that uncommon,
 SW> but no one seemed to have any info on how to init it with Super BBS. 
 SW> After about two weeks of testing, I finally got it to work reliably
 SW> with the following init: 
 SW> AT&FE0H0M0X1&C1&D2&Q5S0=1S2=127S7=60S10=60S36=5S46=136| 
 SW> I know a lot of the parameters are factory defaults which I restore
 SW> the first thing in the string, but I kept them in just to make sure. 
 SW> This string ran Super 117G reliably with an unlocked comm port and
 SW> numerous doors on-line, at all speeds.  I had no front end mailer at
 SW> the time.  The main key to getting it to work was the S36 and S46
 SW> settings.  Without those, some speeds would just get garbage whenever
 SW> they connected.  Hope this helps. 
 SW> Sam Wyatt 

 SW> -!- GEcho 1.00
 SW>  ! Origin: The Basement Exchange - 14,400 at 816-563-6339 (1:280/85)
 SW> 1 



 Area: SUPERBBS 
  Msg#: 2229                                         Date: 02-06-93  10:31
  From: Glenn Pinel                                  Read: Yes    Replied: No 
    To: Frank Hemmelder                              Mark:                     
  Subj: Init Strings Modems

 -=> Glenn Pinel drooled this drivel to Frank Hemmelder about Init Strings Modems on 02-06-93  10:31 <=-

 GP> Hello Frank!

 GP> 31 Jan 93, Frank Hemmelder writes to All:
 
 FH> WANTED -- WANTED -- WANTED -- WANTED -- WANTED -- WANTED -- WANTED
 
 FH> The SuperBBS docs 1.17 are ready. Just over 230 pages this time.
 FH> SuperBBS is expected to be released real soon now!
 
 FH> But for the documentation v1.18 I need the following items:
 
 FH> A.  Modem initialisation strings

 GP> I use a 14.4 Boca external fax/modem and run SuperBBS with Front Door.
 GP> I have had good luck with... 
 GP> AT&F&C1&D2%E1S11=50S10=30S36=7M0W2S37=0S95=3Q0H0|

 GP> (does this mean I'll get famous?!!!

 GP> Glenn

 GP> -!- FMail 0.92
 GP>  ! Origin: Some Guy's Basement (705)322-2643 Phelpston,Ontario
 GP> (1:252/412) 1 



 Area: SUPERBBS 
  Msg#: 630                                          Date: 02-04-93  18:43
  From: Ryan Murray                                  Read: Yes    Replied: No 
    To: Carlos Avellanet                             Mark:                     
  Subj: SBBS & HMB

 -=> Ryan Murray drooled this drivel to Carlos Avellanet about SBBS & HMB on 02-04-93  18:43 <=-

 RM> Hello Carlos!

 RM> Sunday January 31 1993 16:14, Carlos Avellanet wrote to Ryan Shaw:
 
 CA>      For the readers not familiar with this thread, I am having a problem
 CA>      when accessing my SBBS message base. When selecting to read messages,
 CA>      prompted for new, forward, reverse, etc, the message header is
 CA>      displayed and then I am taken to a line(node) number selection prompt
 CA>      as if I wanted to send a message to the user on the other line. I am
 CA>      setup for a single node and when I get the prompt I cannot do
 CA>      anything but select line 1 which immediately takes me right back to
 CA>      the same prompt. Any ideas?

 RM> I got it...Your modem is Using XON/XOFF, first off, disable this if
 RM> you can, that is the best way, you should be using RTS/CTS flow
 RM> control, NOT XON/XOFF. In Other-->ON/OFF-->Allow Ctrl keys in msgs set
 RM> it to NO.  If the option is not there (It might be new to the gamma)
 RM> there is NOTHING you can do (Besides register and then disable it) 
 RM> Hope this helps... 
 RM> \-Ryan-/

 RM> -!- GEcho 1.00/beta+
 RM>  ! Origin: CyberSpace HQz - AllFix Reg/Support, SuperBBS Support
 RM> (1:153/942) 1 



 Area: SUPERBBS 
  Msg#: 902                                          Date: 02-07-93  09:08
  From: Ken Givens                                   Read: Yes    Replied: No 
    To: Tom Barstow                                  Mark:                     
  Subj: Re: SuperBBS Option

 -=> Ken Givens drooled this drivel to Tom Barstow about Re: SuperBBS Option on 02-07-93  09:08 <=-

 KG> Hello Tom!

 KG> Thursday February 04 1993 16:47, Tom Barstow wrote to Tom Scott:
 
 
 TS> TB>> Is there a way you can have users go directly to the qwk
 TS>> menu
 TS> TB>> after sign in?
 TS>>
 TS>> Yes there is a way, you just go to the UserEditor, and I
 TS>> believe it's on the second page of the users info, you can tell
 TS>> SuperBBS what Menu you would like to the user to see first.
 TS>> Just tell it to go to the .QWK menu.
 
 TB> I did that but he still goes thru all the other menus.  Like to have it as
 TB> soon as he checks mail... Thanks Tom

 KG> Rename all of your inbetween files (News.a??, Dec#.a??, etc) and call
 KG> them from the TOP menu using control-A, type 5's. 
 KG> Ken

 KG> -!- GoldED 2.41.B0108+ via EzyCom 1.02
 KG>  ! Origin: The Chess Board - EzyCom Registration - Dallas, Tx
 KG> (1:124/2213) 1 



 Area: SAC SUPERBBS 
  Msg#: 288             Local                        Date: 01-24-93  08:46
  From: Len Morgan                                   Read: Yes    Replied: No 
    To: All                                          Mark:                     
  Subj: Virus Path

 -=> Len Morgan drooled this drivel to All about Virus Path on 01-24-93  08:46 <=-

 LM> I ran into an interesting situation.  I have a small virus program
 LM> that I use to test the Scan program when used in Sbbs.  When you put
 LM> the following line into the config of sbbs, Scan.exe %1 /A /NOMEM
 LM> /NOPAUSE /NOBREAK /NOEXPIRE, it doesn't work.  The only way to make
 LM> Scan work is to put it into the DOS path and leave the pathway, in
 LM> config, empty.  The problem with this work around, is that if Scan gets
 LM> too old, it will send a message that it is over X months old and wait
 LM> for a enter key to proceed. That is what the /NOEXPIRE is for. 
 LM> I have brought this to the attention of Aki, because it appears that
 LM> the %1, which should give the pathway and file name to be tested,
 LM> doesn't work. 
 LM> Another situation that still has me mystified is that when running a
 LM> network, like I am, Netscan has to be run or it won't identify the
 LM> drive letters as valid.  In the last version of both NETSC100 and
 LM> SCANV100, it appears that the .EXE programs are backwards.  This
 LM> latest version requires me to run Scan.exe instead of Netscan.exe to
 LM> make it work.  I thought about renaming the programs and putting them
 LM> in the appropriate package, however, when the program runs, such as
 LM> Netscan, it comes up as Netscan, and renaming it to Scan.exe would be
 LM> confusing and cause doubt on the security of the file. 
 LM> Len
 LM> 
 LM> 
 LM> -!- SuperBBS 1.17 Gamma-1 (Reg)
 LM>  ! Origin: QST - Sacramento's Premier Ham BBS (916) 920-1288
 LM> (1:203/730) 



 Area: SUPERBBS 
  Msg#: 2189                                         Date: 02-11-93  17:33
  From: Greg Thompson                                Read: Yes    Replied: No 
    To: Tom Barstow                                  Mark:                     
  Subj: Browse The Nodelist

 -=> Greg Thompson drooled this drivel to Tom Barstow about Browse The Nodelist on 02-11-93  17:33 <=-

 GT> Hello Tom,

 GT> 10 Feb 93, Tom Barstow writes to All:
 
 TB> What is this used for...I tried it and didn't get it to display
 TB> anything...My config shows correct path to nodelist directory...

 GT> Did you compile the nodelist with Superbbs's compiler? If not then it
 GT> can't read Front Doors or any other type of compiled list. 
 GT> Greg

 GT> -!- FMail 0.92
 GT>  ! Origin: The Nucleus II BBS Ft. Huachuca, Az.(602)459-3653
 GT> (1:309/24) 1 



 Area: SUPERBBS 
  Msg#: 1712                                         Date: 02-11-93  14:34
  From: Lee Anderson                                 Read: Yes    Replied: No 
    To: Tom Barstow                                  Mark:                     
  Subj: First time sign on

 -=> Lee Anderson drooled this drivel to Tom Barstow about First time sign on on 02-11-93  14:34 <=-

 -> Is there a way with lconfig etc...When a user signs on it ask what
 -> language.  I just want English.  So this will not be displayed
 -> as a question?


 LA> Make a language.ctl file and just put ENGLISH on the first line and
 LA> you will default to english. 
 LA> Lee


 LA> -!- PCBoard 14.5a
 LA>  ! Origin: MagicLand PCBoard - D'Bridge Dealer/Support Site
 LA> (1:139/650) 1 



 Area: SUPERBBS 
  Msg#: 673             Rec'd                        Date: 02-09-93  14:29
  From: Tom Scott                                    Read: Yes    Replied: No 
    To: Len Morgan                                   Mark:                     
  Subj: Remote logon  to sysop menu

 -=> Tom Scott drooled this drivel to Len Morgan about Remote logon  to sysop menu on 02-09-93  14:29 <=-

 LM> Do you have the "Allow Remote Sysop" (or something like this)
 LM> on in the config?

 TS> Hi again,

 TS> Yep I sure do... I had another sysop explain to me that the exact
 TS> wording on the command line is the password I have to use to gain
 TS> access to this, but in the sbbsmenu, the exact wording is the
 TS> following: 
 TS> Usage: Menu [password] /M /F /[NS] /[/T ??:??-??:??]

 TS> My command line is :
 TS> Sysop [My password]

 TS> That's it...

 TS> I know this sounds a little confusing, but.. I'm not the best with
 TS> words   <smile> 
 TS> Later,
 TS> -Tom
 TS> -!- 
 TS>  ! Origin: ROBO1.08/SUPERBBS 1.17-GAMA ALPHA COLONY II BBS 2400 BAUD
 TS> (1:140/47) 1 


